Watlow SD6 Data sheet

SERIES SD6_D

Economical
Temperature/Process
Controller with
DeviceNet™
Communications
Protocol

Watlow’s SERIES SD6_D delivers excellent control, quality
and application versatility in a

The SERIES SD6_D has been successfully tested for use
with ODVA and Semiconductor SIG standards for
DeviceNet™ on CAN networks.

The SERIES SD6_D controller includes a universal sensor
input with two outputs that can be configured as heat, cool or
alarm. The DeviceNet™ communications interface is supplied
with either a five pin circular DIN connector for semiconductor
SIG specific applications or a five position removable screw
terminal connector for other market applications.

Additional features of the SERIES SD6_D family of
controllers include Watlow’s INFOSENSE™ sensor
technology, a user definable menu system and a Save and
Restore feature that allows users to restore factory as well
as individually defined parameter values.

The SERIES SD6_D is available as a static set point and
limit controller. Ramp soak profile versions will be available in
the future. The controllers offer a three-year warranty, are UL
and C-UL®listed, CSA approved, CE certified and include the
NEMA 4X (IP65) and NSF ratings. Limit versions of the
controller have FM (factory mutual) approval.

1

⁄16 DIN panel mount package.

Features and Benefits

DeviceNet™ communications capabilities

• Integrates with other DeviceNet™ nodes and software

• Users can select the DeviceNet™ implementation to

meet their application needs

• Network and module status LEDs simplify commissioning

and troubleshooting a network

INFOSENSE™ sensor technology

• Thermo-sensing technology improves sensor accuracy

by a minimum of 50 percent

“Save and Restore” feature for user settings

• Allows the user or OEM to save and restore individual

parameter settings

• Reduces downtime and trouble shooting costs due to

programming errors

User defined menu system

• Allows the operator to view necessary information only

• Improves operational efficiency

Ramp to set point

®

• Controls temperature rise

Variable burst fire

• Prolongs heater life

1241 Bundy Boulevard
Winona, Minnesota 55987-5580 USA
Phone: [phone]
Fax: [phone]

UL®and C-UL®are registered trademarks of Underwriter’s
Laboratories, Inc.
DeviceNet
Association

© 2005 Watlow Electric Manufacturing Company Printed in the USA on Recycled Paper, 15% Postconsumer Waste

™

is a trademark of the Open DeviceNet Vendors

Internet: www.watlow.com
e-mail: [e-mail]

WIN-SD6D-0305

Specifications

Line Voltage/Power

• 100 to 240VÅ(ac), +10/-15 percent; (85-264VÅ(ac))
50/60Hz, ±5 percent

• 24V

ı(ac/dc), +10/-15 percent; 50/60Hz, ±5 percent

• 10VA maximum power consumption

• Data retention upon power failure via nonvolatile memory

Environment

• -18 to 65°C (0 to 149°F) operating temperature

• -40 to 85°C (-40 to 185°F) storage temperature

• 0 to 90 percent RH, non-condensing

Accuracy

• Calibration accuracy and sensor conformity: ±0.1 percent
of span, ±1°C @ the calibrated ambient temperature and
rated line voltage

• Calibration ambient temperature = 25°C ±3°C (77°F ±5°F)

• Accuracy span: 540°C (1000°F) minimum

• Temperature stability: ±0.1°C/°C (±0.2°F/°F) rise in
ambient maximum

Agency Approvals

•UL®3121, C-UL®‚ CE, NEMA 4X/IP65, NSF

Controller

• Microprocessor based user-selectable control modes

• Single universal input, up to two outputs

• Control sampling rates: input = 6.5Hz

Operator Interface

• Dual 4 digit, 7 segment LED displays

• Advance, infinity and up down keys

Wiring Termination -Touch Safe Terminals

• Input power and control outputs 12 to 22 AWG

• Sensor inputs and process outputs 20 to 28 AWG

DeviceNet™ Communications

• Network and Module Status LEDs

• DeviceNet™ Semi-Conductor SIG, 5 pin circular (Type
M12) connector, discreet rotary switches for Address and
Data rate selections

• DeviceNet ODVA Traditional Markets, 5 pin removable
screw terminal connector with Address and Data Rate
selections via embedded firmware parameters

Control Outputs
Outputs 1, 2

• User selectable for heat/cool as on-off, P, PI, PD, PID or
alarm action. Not valid for limit controllers

• Electromechanical relay. Form A, rated 2A @ 120V
2A @ 240V

• Switched dc non-isolated minimum turn on voltage of
6V

Î(dc) into a minimum 500Ω load with a maximum on
voltage of not greater than 12V
Maximum switched dc power supply current available for
up to two outputs is 60mA

• Solid-state relay, Form A, 0.5A @ 24V
264V
suppression

• Process output (Non Isolated) User-selectable
0-10V
0-20mA, 4-20mA @ 800

Å(ac) or 2A @ 30VÎ(dc)

Î(dc) into an infinite load.

Å(ac) minimum,

Å(ac) maximum, opto-isolated, without contact

Î(dc), 0-5VÎ(dc), 1-5VÎ(dc) @1KΩ minimum,

Ω maximum

Å(ac),

Universal Input

• Thermocouple, grounded or ungrounded sensors

• RTD 2- or 3-wire, platinum, 100
curve (0.00385

• Process, 0-20mA @ 100
impedance; Scalable

• Inverse scaling

• >20M

• Maximum of 20

Allowable Operating Range

Type J: 0 to 815°C or 32 to 1500°F
Type K: -200 to 1370°C or -328 to 2500°F
Type T: -200 to 400°C or -328 to 750°F
Type N: 0 to 1300°C or 32 to 2372°F
Type E: -200 to 800°C or -328 to 1470°F
Type C: 0 to 2315°C or 32 to 4200°F
Type D: 0 to 2315°C or 32 to 4200°F
Type PTII: 0 to 1395°C or 32 to 2543°F
Type R: 0 to 1760°C or 32 to 3200°F
Type S: 0 to 1760°C or 32 to 3200°F
Type B: 0 to 1816°C or 32 to 3300°F
RTD (DIN): -200 to 800°C or -328 to 1472°F
Process: -1999 to 9999 units

Ω input impedance

Ω/Ω/°C)

Ω source resistance

Ω @ 0°C calibration to DIN

Ω, or 0-10VÎ(dc) @ 20kΩ input

Ordering Information

To order, complete the model number on the right with the
information below.

S D 6 _ - _ _ _ A - D _ _ _

Control Type

C = PID control
L = Limit control
R = Ramping (future product)

Power Supply

H = 100 to 240Vı(ac/dc)
L = 24 to 28V

Output 1

C = Switched dc
K = SSR, Form A, 0.5A
F = Universal process
J = Mechanical relay, Form A, 2A

Output 2

A = None
C = Switched dc
K = SSR, Form A, 0.5A
J = Mechanical relay, Form A, 2A

DeviceNet™ Communications

N = DeviceNet™ ODVA traditional markets
S = Semi-SIG ODVA semi-conductor markets

Display Colors and Custom Options

RG = Red Green
RR = Red Red
XX = Custom options, special overlays, etc.

ı(ac/dc)

To be automatically connected to the nearest North American Technical and Sales Office call:

1-800-WATLOW2

International Technical and Sales Offices: Australia, [phone] • China, [phone] • France, [phone] •

Germany, [phone] • Italy, [phone] • Japan, [phone] • Korea, [phone] • Malaysia, [phone] •
Mexico, [phone] • Singapore, [phone] • Spain, [phone] • Sweden, [phone] • Taiwan, [phone] •
United Kingdom, [phone]