Watlow RT Style User Manual

RESISTANCE TEMPERATURE SENSING (RTDs)
Watlow RTDs Ensure Precise and Repeatable Temperature Measurement
Watlow provides a complete line of RTDs for a wide variety of process and industrial applications. These sensors have been designed to ensure precise and repeatable measurements as well as meet the environmental requirements for the application. RTD sensors may be configured to meet your specific application need with options including, but not limited to the following: element type, lead wire configuration, termination style, sheath materials, lengths and diameters, process connection heads, transmitters, thermowells, spring loading, flanges and surface mount packages.
Watlow takes pride in working with customers to solve difficult application problems and will work with you to tailor a solution to meet your specific application requirements.

Applications

Air conditioning and refrigeration servicing
Furnace servicing
Food equipment
Processing
Stoves and grills
Textile production
Plastics processing
Petrochemical processing
Micro electronics
Air, gas and liquid temperature measurement

Features and Benefits

Provides highly-repeatable, long-ter
Allows elements from different lots to be substituted without
recalibration
High signal-to-noise output
Increases accur
Permits greater distances between sensor and measuring
equipment
Linear change in resistance per degree change in temperature
Mak
es it easy to interpret the signal
Allows for less complex instrumentation
No cold junction compensation required like a thermocouple
High accuracy
Pro
vides RTDs with either Class A +/- 0.15°C or Class B
+/- 0.3°C nominal at 0°C
Provides three and four wire constructions available to
minimize impact
Wide temperature operating range
Oper
ates at temperature ranging from -200 to 650°C
(-328 to 1202°F)
acy of data transmission
m, accurate readings
Your Authorized Watlow Distributor is:
© 2007 Watlow Electric Manufacturing Company
RIC-RTD-0907
Standard Industrial Insulated Leads –
Lead Wire
Length
L
1
/
2
in. (13 mm)
Nominal
L
L
E
6 ft. (1829 mm) Teflon
®
Leads
1
/
2
in. (13 mm)
Nominal
L
Single Threaded Fitting
L
Double Threaded Fitting
3
/
4
in. (19 mm) NPT
Nom. 6 in.
(152.4 mm)
L
3
/
4
"
NPT
Nom. 4"
L
3
/
4
in. (19 mm) NPT
Nom. 4 in. (152.4 mm)
L
3
/
4
in. (19 mm)
NPT
Nom. 2 in. (50.8 mm)
L
3
/
4
in. (19 mm)
NPT
L
Style RB
Style RB RTDs have standard, insulated leads with an internal heat transfer plate for a quick time response and high accuracy. These RTDs are also epoxy sealed to resist moisture and pull out. There is a standard 260°C (500°F) potting. Style RB RTDs are constructed of 316 stainless steel for a durable, rigid sheath with temperatures from -50 to 260°C (-58 to 500°F). These RTDs are manufactured in diameters from 0.125 to 0.250 inches.
Emergency Use Cut-to-Length – Style RK
Style RK RTDs are manufactured with a cut-to-length feature that combats the need to stock several RTD lengths. The probes can be shortened to a three inch minimum using a tubing cutter. These sensors have dependable readings, three-wire, Class A DIN 0.00385 curve. Style RK RTDs are internally sealed to prevent moisture penetration and are constructed with a durable, rigid 316 stainless steel sheath with temperatures from -50 to 260°C (-58 to 500°F). These RTDs can be sold in an emergency kit of five adjustable RTD sensors.
Plug or Jack Termination – Style RC
Style RC RTDs are manufactured with durable connectors with copper pins for plug or jack termination applications. These provide simple connection to extension leads and have a 200°C (400°F) temperature rating. In addition, the RTD has a crimp, compression adapter that assures superior connector attachment with high accuracy and dependable readings. Style RC RTDs are constructed of 316 stainless steel for a durable, rigid sheath with temperatures from -50 to 260°C (-58 to 500°F).
Metal Transitions – Style RF
Style RF RTDs is constructed of flexible, mineral insulation that provides a bendable and highly durable sensor. It is manufactured with stainless steel transitions that are crimped to the sheath and filled with 260°C (500°F) epoxy (brazing is optional). These sensors have a coiled spring for strain relief, which protects lead wire against sharp bends in the transition area. The RF RTD has a -200 to 650°C (-328 to 1200°F) temperature rating with dependable readings and high accuracy. These sensors come in diameters ranging from 0.125 to
0.250 inches.
Connection Head – Style RR
Style RR connection heads provide superior dust and moisture resistance and come in single and double threaded fittings. These weatherproof plastic heads resist weak acids, organic solvents, alkalies, sunlight and dust. Complete assembly is available.
Thermowells – Style RT
Style RT thermowells and pipe wells protect the sensor and are made of high quality construction. They are constructed with mineral insulation and are available in diameters ranging from 0.125 to 0.250 inches. Style RT is available with spring-loading ensuring positive contact every time. There are a variety of connection head options to meet your specific application requirements. Complete assembly is available.
Type 1
Type 2
Type 3

Ordering Information

Ordering information varies. Please contact Watlow for details.
Type 4
To be automatically connected to the nearest North American Technical and Sales Office:
1-800-WATLOW2 • www.watlow.com • info@watlow.com
International Technical and Sales Offices: Australia, +61-3-9335-6449 • China, +86-21-3950-9510 • France, +33 (0) 3073-2425 •
Germany, +49 (0) 7253-9400-0 • Italy, +39 (0) 2 458-8841 • Japan, +81-3-3518-6630 • Korea, +82-2-575-9804 • Malaysia, +60-3-7980-7741 • Mexico, +52 (442) 217-6235 • Shanghai, +86-21-3950-9504 • Singapore, +65-6777-1266 • Spain, +34 91 675 1292 • Sweden, +46 35-27-11-66 • Taiwan, +886-7-288-5168 • United Kingdom, +44 (0) 115-964-0777
Loading...