Watlow RF Style Data sheet

W A T L O W
99
RTDs and Thermistors
RTDs and Thermistors
Resistance Temperature Sensing
Watlow’s platinum resistance elements are specially designed to ensure precise and repeatable temperature versus resistance characteristics. The sensors are made with controlled purity platinum, have high purity ceramic components and constructed in a unique strain­free manner.
Performance Capabilities
• Ceramic elements are extremely precise and stable within the wide temperature range of -200 to 650°C (-328 to1200°F).
Features and Benefits
Patented, strain-free construction
• Provides dependable, accurate readings
• Allows elements from different lots to be substituted without recalibration
High signal-to-noise output
• Increases accuracy of data transmission
• Permits greater distances between sensor and measuring equipment
Temperature coefficient (alpha) carefully controlled while insulation resistance values exceed DIN-IEC-751 standards
• Ensures sensor sensitivity
• Minimizes self heating
• Allows precise measurement
• Repeatable
Highly controlled manufacturing process
Ensures wide temperature range
• Stabilizes physical and chemical attributes
Metric diameters and fittings are available, please consult factory
Applications
• Air conditioning and refrigeration servicing
• Furnace servicing
• Stoves and grills
• Textile production
• Plastics processing
• Petrochemical processing
• Micro electronics
• Air, gas and liquid temperature measurement
• Exhaust gas temperature measurement
102
RTDs and Thermistors
RTD Style RF
Metal Transitions
L
E
1-2. Style
F = Metal transition with strain relief
3. Sheath O.D. (inch)
G = 0.125
H = 0.188 J = 0.250
4. Lead Wire Construction
Standard Overbraid Flex Armor Fiberglass Stranded A JR PFA or TFE Stranded B LT
5. Fittings
If required, enter order code from pages 39 to 40.
If none, enter “0”.
6. Lead Wire Termination
A
b
= Standard male plug
B
b
= Standard female plug
C
b
= Standard plug with mating connector
J
b
= Male miniature plug
K
b
= Female miniature jack
L
b
= Male/female mini set
T = Standard leads
U = Leads with spade lugs
7. Sheath Construction
316 SS Alloy 600
Mineral Insulated K L
8-9. Sheath Length “L” (inch)
03, 06 and 12
Whole inches: 03 to 99 Metric lengths and lengths over 99 inches consult factory.
10. Sheath Length (fractional inch)
0 = No fraction, whole inches
1=
1
8 3=3⁄8 5=5⁄8 7=7⁄8
2=1⁄4 4=1⁄2 6=3⁄4
11. Element
2-wire 3-wire
100Single A B
12. Temperature Coefficient
DIN 0.00385
A = Class A B = Class B
13-14. Lead Wire Length “E” (foot)
02 and 04
Whole feet: 01 to 99
15. Special Requirements
0 = None
X = Special requirements, consult factory
R
123456789101112131415
F
b
Requires two- or three-wire only, single element only
Features and Benefits
Stainless steel transitions
• Crimped to sheath and filled with 260°C (500°F) epoxy
• Optional brazing available
Coiled spring strain relief
• Protects lead wire against sharp bends in the transition area
Flexible mineral insulated construction
• Provides a bendable and highly durable sensor
Temperature rating
-200 to 650°C (-328 to 1200°F)
High accuracy
• Dependable readings
Diameters available
0.125 to 0.250 inch O.D.
Custom Ordering InformationItems in Bolded Green Type are preferred
with shorter lead times.
Rapid Ship sensors come with 100DIN 0.00385 curve, 316 stainless steel, 0.188 inch diameter, 24 AWG stranded Teflon
®
three-wire, four foot leads, temperature rating -200 to 650°C (-328 to 1200°F), standard split end lead termination and no mounting fittings. See page 166 to order additional connector hardware.
Rapid Ship Sensors
Sheath
Class Length Part Number
Accuracy in. (mm) 4 foot (102 mm) Leads
3 (76) RFHB0TK030BA040
A
6 (152) RFHB0TK060BA040 9 (229) RFHB0TK090BA040
12 (305) RFHB0TK120BA040
Loading...