|
Model WP-60/65/70 |
QUICK START GUIDE |
|
1 Prepare the Reservoir: |
2 Select and Insert Tip: |
Fill |
Remove the reservoir |
|
from base and fill with |
|
|
|
lukewarm water. |
No |
|
|
Gap |
|
Replace |
Press tip firmly into |
|
handle. When tip is |
|
|
Insert |
properly inserted there |
Replace the |
|
should be no gap between |
|
control knob and tip. To |
|
reservoir onto the base, |
remove tip, simultaneously |
|
PRESSING DOWN FIRMLY |
hold control knob down |
|
to ensure full seating. |
and lift tip up. |
3Prime Unit (First Time Use Only):
Prior to Very First Use of Unit, Prime Unit:
Set pressure control slide switch on handle tohigh, point the handle and tip into sink. Turn unitONuntil water flows from the handle, turn unit OFF.
High
4Adjust Pressure and Pause Control:
For first time users, adjust pressure control to lowest position.
Gradually increase pressure as you prefer.
Low
You can temporarily stop water flow by pressing the pause button on the handle.
PAUSE
continued on back