Model
H-223
401.8 MHz GOES
Satellite Antenna
Owner’s Manual
Revision: 1.00
NOTICE
This product embodies technology that is confidential and proprietary technology of DESIGN
ANALYSIS ASSOCIATES, INC., and which is protected by United States copyright laws and
international copyright treaty provisions, and/or by contract and applicable laws of trade secrecy.
These include all Software, Printed Circuit Board Artwork, Schematic Diagrams, and
Technologies applied therein. The enclosure encasing the electronics of this instrument may not
be opened without written consent of DESIGN ANALYSIS ASSOCIATES, INC., and any
attempt to do so without such written authorization constitutes a breach of contract and will also
void any applicable warranty for the product.
Design Analysis Associates, Inc.
75 West 100 South
Logan, UT 84321 USA
Phone: (435) 753-2212
Fax: (435) 753-7669
Internet: www.waterlog.com
E-mail: sales@waterlog.com
Table of Contents
User Agreement / WATERLOG® Warranty .............................................. W-1
Assembly & Installation Instructions
1.0 Introduction ....................................................................1-1
2.0 Assembly ......................................................................1-1
2.1 Install the Director and Reflector Elements .....................................1-2
3.0 Installation .....................................................................1-4
4.0 Lead Wire......................................................................1-4
H-223 GOES Antenna Assembly .......................................................1-5
User Agreement/
ATERLOG
W
1. NATURE OF THE PRODUCT
This agreement accompanies a pressure measuring system comprising micro-coded circuitry and other
electronic equipment sealed in an enclosed housing, and packaged together with written instructional
materials. The packaged electronic circuitry and instructional materials herein are collectively referred to
as the “PRODUCT.” The PRODUCT is made available from DESIGN ANALYSIS ASSOCIATES,
INC., of 75 West 100 South, Logan, Utah 84321 (hereinafter referred to as “DESIGN ANALYSIS”), and
contains information and embodies technology that is confidential and proprietary to DESIGN
ANALYSIS, and the availability and use of the PRODUCT is extended to you, the USER, solely on the
basis of the terms of agreement which follow.
2. ACKNOWLEDGMENTS BY USER
Opening the package which encloses the accompanying PRODUCT indicates your acceptance of the
terms and conditions of this agreement and constitutes an acknowledgment by you of the confidential and
proprietary nature of the rights of DESIGN ANALYSIS in the PRODUCT.
3. DUTIES OF YOU, THE USER
In consideration for the access to and use of the PRODUCT extended to you by DESIGN ANALYSIS
and to protect the confidential and proprietary information of DESIGN ANALYSIS, USER agrees as
follows:
®
Warranty
(a) USER agrees that they will not open the sealed housing of the PRODUCT, and that
they will take all necessary precautions to prevent their employees, agents, sub-contractors
and resellers from doing so.
(b) USER agrees that they will not remove from the exterior of the housing of the PRODUCT
any warnings against opening or notices of proprietary interest placed thereon by DESIGN
ANALYSIS, and that they will take all necessary precautions to prevent their employees,
agents, sub-contractors, and resellers form removing such markings therefrom.
(c) USER agrees to treat the PRODUCT with the same degree of care as USER exercises in
relation to their own confidential and proprietary information.
(d) USER agrees to return the PRODUCT to DESIGN ANALYSIS if and when the PRODUCT
is deemed to be no longer of use. In return therefore, USER will receive from DESIGN
ANALYSIS a redemption fee of $10.00.
H-223 User Agreement/WATERLOG
®
Warranty W-1