Water Creation SSUS3319A16, SSUS3019B16, SSUD3118B16, SSUS3018B16, SSUS1520A16 User Manual

...

APPROXIMATE

ELEMENT CLIP

SILICONE

LOCATIONS

UNDERMOUNT SINK CUTOUT TEMPLETE

ANCHOR PLUGS INSERT

SINK

FIXING CLAMP

SCREWS (NOT INCLUDED)

UNDERMOUNT INSTALLTION INSTRUCTION

This sink is specifically designed to be under-mounted in a solid surface countertop only

CAUTION: Sink edge may be sharp; handle with caution. Inspect sink carefully before installation

1.Cut out countertop using this “ bowl size cutout template”.

2.Determine placement of clip brackets as indicated by template.Pre-drill holes according to method desired based on countertop material.

3.Apply a bead of silicone evenly along edge on underside of countertop.

4.Position and align sink over opening. Press sink onto Silicone seal.

5.Double check alignment. Tighten clip brackets against sink edge.

6.Remove excess silicone.

NOTE:THIS TEMPLATE INSTALLTION INSTRUCTION IS ONLY A GUIDE.ACTUAL SINK SHOULD BE PRESENT TO ENSURE PERFECT CUT OUT.

Specifications and Main Features