Water Creation F6001701PL, F6001701CL, F6001701AL, F6001705AL, F6001705CL User Manual

BEFORE YOU BEGIN

1) Shut off water supply.

2) Carefully inspect waste and supply tubing for signs of damage.

3) Replace waste or supply tubing if necessary

TOOLS AND MATERIALS

MODEL: F6-0017

INSTRUCTIONS

1) Attach the rubber washer into wall coupler nut (6), connect it
with faucet body.

2) Attach the rubber washer into cradle nut (4), connect it with
faucet body elbow (5).

3) To set the faucet onto tub and shanks go through the tub wall
holes.

4) Install the lock nut (7) then tighten with wrench.

5) Assemble the hand shower (1) (2) and hose (3) with rubber
washer, then to connect with cradle

6) If necessary, to assemble the 3/4” to 1/2” adapter (8) with
rubber washer.

7) Set the handles (9) on faucet body with screws.

8) Connect the water supply lines to wall coupler
shank/adapter.

9) Turn on main water supply and check all connections for
leaking.

COMPLETE INSTALLATION

Note: All nuts connections, hand tighten first then quarter turn

tighten by wrench. Don’t over tighten the nut.

Metal Lever

Porcelain Lever

TUB FAUCET INSTALLATION GUIDE