Water Creation F6001003AL, F6001003CL, F6001002PX, F6001003PL, F6001003AX User Manual

BEFORE YOU BEGIN

1) Shut off water supply.

2) Carefully inspect waste and supply tubing for signs of damage.

3) Replace waste or supply tubing if necessary

TOOLS AND MATERIALS

INSTRUCTIONS

1) Attach the rubber washer into wall coupler nut (7), connect it
with faucet body (5).

2) To set the faucet onto tub and shanks go through the tub wall
holes.

3) Install the lock nut (8) then tighten with wrench.

4) Set the handles (6) on faucet body with screws.

5) Attach the rubber washer into cradle nut (4), connect it with
faucet body.

6) Assemble the hand shower (1) (2) and hose (3) with rubber
washer, then to connect with cradle

7) If necessary, to assemble the 3/4” to 1/2” adapter (9) with
rubber washer.

8) Connect the water supply lines to wall coupler
shank/adapter.

9) Turn on main water supply and check all connections for
leaking.

COMPLETE INSTALLATION

Note: All nuts connections, hand tighten first then quarter turn

tighten by wrench. Don’t over tighten the nut.

MODEL: F6-0010

Porcelain Lever

Metal Lever

Porcelain Cross

Metal Cross

TUB FAUCET INSTALLATION GUIDE