Page 1
QQUUIICCKK CCOONNNNEECCTTIIOONN GGUUIIDDEE
CCoonnnneeccttiinngg YYoouurr EENNCC-0044
PPaacckkaaggee CCoonntteennttss::
LAN / WAN
Free DDNS
www.dvrid.com
NVR (X1) Cameras (X4) Remote Control (x1)
Ethernet Cable (X1) Power Cable (X2)
Software CD (X1) Mouse (X1) Power Adaptor (X2)
PoE
48 Volts Power
12 Volts Power
Router*
Microphone*
Speaker*
Smart Phone*
VGAand/or HDMI*
Windows or MAC Connection*
PoE IP Cameras
Power
ON/OFF
Mouse
WatchNET Products are subject to continuous changes and improvements,
information on this document is subjected to change without prior notice.
2013 WatchNET Inc. © All Rights Reserved
* Not included/sold separately.
Quick Start Guide (X2) Warning Sticker (X1) Mouse Pad (X1)
110V AC / 240V AC
Page 2
EEAASSYY SSTTAARRTT-UUPP WWIIZZAARRDD
When first booting up the
NVR, Start-up Wizard will
initiate. Clicking "next step"
will start the Wizard.
Cancel to exit
Use the mouse to navigate
thru the setup
Login
Systems Default
Username: admin
Password: 1234
System Settings
Adjust the time and date. Click "Save" before moving to the next step.
Network
Change the default network to match the local network. Ask the network
administrator for the proper IP address, Gateway and Subnet Mask.
Click Next Step when done
Save Date & Time
adjustments
Remote Device
MPIX cameras will auto-enroll, will be assigned an IP and camera number
Defaults:
Cam 1 will be assigned to 10.1.1.65
Cam 2 will be assigned to 10.1.1.66
Cam 3 will be assigned to 10.1.1.67
Cam 4 will be assigned to 10.1.1.68
Recording Schedule
User can choose what the NVR records. Normal, Alarm,
Motion or all events
By default all NVRs are set to record motion 24/7
Camera Number
Hours of the day
Days of the week
Recording
Color Codes
Click Next Step and Close the Wizard.
Now the system is setup
and ready for recording.
11
Step
22
Step
33
Step
44
Step
55
Step
Loading...