Watchguard Firebox SOHO 6 Wireless Instructions Manual
Design for Manufacturing and Environment Document
Document Number: 480-2523-001
SOHO 6 Wireless
De-manufacturing
Instructions
WatchGuard Technologies. Doc #480-2523-001 Rev. A Page 1 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Design for Manufacturing and Environment Document
1.0 Purpose
This instruction defines the de-manufacturing process for the recovery of this product
family as it pertains to recycling of the major product components.
2.0 Scope
This instruction applies to the following product family and family part numbers.
Product Family Name Family part #’s (not necessarily inclusive)
Firebox SOHO 6 Wireless
• Firebox SOHO 6 Wireless; all revisions
WatchGuard Technologies. Doc #480-2523-001 Rev. A Page 2 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
p
3.0 Instruction
3.1 -Remove wireless antenna and antenna hardware
Material removed (P/N
& material type)
Antenna
1305-002 - TPE, PC,
reverse SMA connector, RG178 coaxial cable; 2.4Ghz; 2
ea.
Design for Manufacturing and Environment Document
Instruction visual
Washer
No p/n - Gold plated
brass; 2 ea.
Nut
No p/n - Gold plated brass
Remove antenna by
unscrewing from chassis
ost, 2 sides
Remove hardware; 2
sides
WatchGuard Technologies. Doc #480-2523-001 Rev. A Page 3 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Loading...