Watch Guard CMR24WAT User Manual

• WARRANTY SERVICE CARD

WARRANTY CARD

PRODUCT NAME Wireless Transceiver System PERIOD
MODEL NAME CMR-24WAT

1 YEAR

From the

date of

PURCHASE DATE . . 200_

CMR24WAT

WIRELESS TRANSMITTER SYSTEM

purchase.

WARRANTY PERIOD

. .

200_

CUSTOMER’S ADDRESS : NAME :

TEL :

AGENT’S ADDRESS : NAME :

User’s Guide

TEL :

* Be sure to fill in blanks when the unit is sold

We grant 1 year warranty on the product commencing on the
date of purchase. Within the warranty period, the manufacturer

will correct, free of charge, any defect in the unit resulting from

faults in materials or workmanship, either by repairing or
replacing the entire unit as manufacturer may choose.
This warranty does not cover: damages due to improper use,
normal wear and tear, or defects that have a negligible effect on
the value or operation of the unit. The warranty is void if repairs
are undertaken by unauthorized persons and if original Trinus
parts are not used.
To obtain service within the warranty period, bring in or ship the
complete unit with your purchase invoice to a Trinus Customer
Service Center.

● Read this user’s guide carefully for safe operation and proper
use of the product .

●

Features and specifications are subject to change without

notification.

WARNING

This device complies with Part 15 of the FCC Rules.

* Please turn off the power before connecting or

disconnecting any cables.

- Do not immerse in water or keep in humid areas

- Do not place near TV, speakers, or other electronic devices

O

peration is subject to the following two con

diti

ons :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including

interference that may cause undesired operation.

-

Before installation, check power supply and voltage to avoid

hazards

- Do not apply force or shock to the unit

- Do not disassemble the unit

CAUTION :

Changes or modifications not expressly approved by

the party responsible for compliance could void the user s authority
to operate this device.

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.

TECHNICAL SPECIFICATIONS

Operating Voltage TX: 3.7VDC RX: 12VDC

~

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.

Frequency Range

2400MHz 2483MHz

Operating Range Up to 1800 feet at the open field

* Note : Operating Range can be different

according to the environment

Operating Temperature 10 ~ 110 °F

If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

LED Indicators TX: low battery warning, Out of Range,

Talk On, Mute

RX: Charging indicator, Talk On

Jacks 8 pin RJ-45 for power, audio out, and

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

tri

gger ou

t

Battery

Capacity: Lithium-Li-Polymer 3.7V

DC/1400mA
Charging time: 3 hours
Talk Time: Max. 13 Hours

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body. This transmitter must not be

1 10

co-located or operated in conjun ction with any other antenna or
transmitter.