Watchguard 2BWIR Installation Manual

MODEL: 2BWIR

Black & White Wireless

Video Surveillance System

INSTALLATION MANUAL

N517

V1.0

Camera Monitor

- Compact 2.4 GHz Mini Black & White Camera - 5.5” High Resolution CRT

- Sturdy Design with Metal Housing - Contrast, Brightness & Vertical Hold Adjustments

- CMOS Black an d Wh i t e I m ag e S en s o r - 3 Channel Ca m er a S i gn al I np ut

- 6 x IR LED’s for Short Range Night time operation - Manual or Automatic Camera Switching

- Swivel Bracket - 350 TV Line Resolution

- Up to 100m Range (Line of Sight) - 12-15VDC Operational Voltage

Package Contents (Before comme ncing installation, please ensure you have all the parts listed below.)

Installation

1

2

3

6

1 A

1. Connect the DC 8V power supplies to each camera & take note of their channel numbers

2. Connect DC 13.5V power supply to the back of the monitor. Make sure the camera type selection switch on
the rear of the monitor is set to “wireless”.

3. Raise the antenna on the monitor to the vertical position.

4. Switch the monitor on via the power switch on the front.

5. Depress the channel selection switches for both of your supplied camera channels. Every 3 seconds you

1