User Manual
Bluetooth Earphone
Model: BES1536
Wata Electronics Co., Ltd.
Wata Electronics Co.,Ltd
No 142,South Tanshen Road, Tanzhou Town,ZhongshanCity,Guangdong,China
Model：BES1536
Packing list
Headset line drawing, with medium earmuffsx1
Large size earmuffs&Small size earmuffsx1
Charging Cablex1
Usage method：
N0
2-1
2-2
2-3
2-4
2-5
2-6
2-7
Item
Boot
Stand-by
(Disconnect the
device state)
Low power display
Pairing Modes
Paired
Fail to pair
Call (By mobile
phone)
Visual indication
Blue light for 1.5S when turning on
Slow flashing ofblue light when entering
standby state
Red light flasheswhen less than 3.3V
Red and blue lights flash alternately
Ultra-slow flashing of blue light
Red and blue lights stillflash alternately
Ultra-slow flashing of blue light
Audio indication
One sound tips warning
One sound tips warning
One sound tips warning
Key tone
2-8
2-9
Answer the phone
(incoming call state)
Charging mode
Ultra-slow flashing of blue light
Red light when charging,the lights
offafter full charge
With incoming call tone
No prompt tone
Operation
Result
3-1
Boot
Press MFB key for 2s
Blue light for 1.5s·one sound
tips warning·
3-2
Shutdown
Press the power button for 4s in the
boot state
Red light for 1.5s
3-3
Pair
Long press the MFB button for 4s in
the off state
Red and blue lights flash
alternately
2. Bluetooth pairing name "BEM1536"
Input “0000”, Only when the phone's
Bluetooth version is lower than V2.0,
it need passwords, most of smart
phones do not need passwords
currently.
3-4
Fail to pair
3-5
Volume increase
Short press "+ button" for volume
increase
Volume increasing state
3-6
Volume reduction
Short press "- button" for volume
reduction
Volume reduction state
3-7
Last
Long press "-"for the previous song
The previous song
3-8
Next
Long press "+ key"for the next song
The next song
3-9
Hang up
Short press MFB button
Hang up the phone
3-10
Answer
Short press MFB button
Ringstops automatically
afteranswering
3-11
Refuse
Long press
Refuse to answer the phone
Product parameters:
Speaker type: 12mm moving-coil loudspeaker
Speaker material: PET Composite material diaphragm
Sensitivity: 102±3dB
Impedance: 32Ω±15%
Frequency response: 20-20KHz
Rated power: 3mW
Maximum load power: 5 mW
Weight:118.7g
Bluetooth working range: 10 meters or more under open environment
FCC ID：2AIE2BES1536
FCC warnings:
Changes or modifications not expressly approved by the party responsible for compliancecould
void the user's authority to operate the equipment. This device complies with Part15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that maycause
undesired operation.
Loading...