Waste King 2000-1 User Manual
FEATURES
• 2 HP disposer, dual voltage
• Fan cooled motor with ball bearing construction and integral
overload protection
• Dynamically balanced for smooth, long wearing operation
• Hush Cushion®mounting connection for 6” cone or sink opening
• Cast iron grind chamber with directional feeder ridges
• Cast iron exit chamber with auxiliary water injection inlet
•6
1
/4" Diameter heavy duty, cast stainless steel turntable
• 2 Jam resistant, hardened stainless steel swivel impellers
with tungsten carbide inserts
• Stainless steel undercutter blade
• Hard, tough, cast alloy grind ring with dual stage grinding action
• Lifetime particle size control by non-wearing exit slots
• Threaded adjustable stainless steel legs
WASTE KING®EXCLUSIVES
• Stainless Steel Swivel Impellers swivel and retract if they are jammed so that
they return to the grinding position during revolution, reducing motor
overloading and costly jams. Waste King’s stainless steel swivel impellers
eliminate the need for reversing
switches and special ”de-jamming“ wrenches.
• Stainless Steel Undercutter Blade located beneath the grind ring snips fibrous
and stringy waste into small particles making them less likely to clog drain lines.
• Hush-Cushions®isolate the unit from metal to metal contact, significantly
reducing noise level. Hush-Cushions®are specially compounded and designed
to withstand vibration and tension, and have a built-in safety splash guard.
COMMERCIAL FOOD WASTE DISPOSER SPECIFICATIONS
2000-1
2 HP • Single Phase
2000-3
2 HP • 3 Phase
APPLICATION
MEDIUM TO LARGE RESTAURANTS WITH
HEAVY VOLUME BUT ONLY AS MUCH DIFFICULT
FOOD WASTE AS WOULD RESULT FROM THE VARIETY OF AN AVERAGE MENU.
MOUNTING SYSTEMS
®
Basic Cone
Assembly (B)
• 12", 15", or 18" Cone
with Swirl Sprays
All-Purpose Cone
Assembly (AP)
• 12", 15", or 18" Cone
with Swirl Sprays
• Silver Guard
• Scrap Ring
Dish Table Cone
Assembly (DT)
• 12", 15", or 18" Cone
with Swirl Sprays
• 12", 15", or 18"
Cone Cover
• Scrap Ring
Trough Mount
Assembly (TM)
• #2536 6” Weld-in
flange for models
with 6” throat
Sink Mount
Assembly (SM)
• #2542 31/2" Bolt-in
adapter for legsupported models
with 6” throat
Add desired Waste King water controls, switch or panel control box to complete your package. (See catalog)
Loading...