Waste King 1500-1 User Manual
FEATURES
•11/2HP disposer, dual voltage
• Fan cooled motor with ball bearing construction and integral
overload protection
• Dynamically balanced for smooth, long wearing operation
• Hush Cushion®mounting connection for 6” cone or sink opening
includes an auxiliary water inlet
• Stainless steel grind chamber
• Corrosion proof, glass reinforced polyester exit chamber
•61/4" Diameter heavy duty, cast stainless steel turntable
• 2 Jam resistant, hardened stainless steel swivel impellers
with tungsten carbide inserts
• Stainless steel undercutter blade
• Hard, tough, cast alloy grind ring with dual stage grinding action
• Lifetime particle size control by non-wearing exit slots
WASTE KING®EXCLUSIVES
• Stainless Steel Swivel Impellers swivel and retract if they are jammed so that
they return to the grinding position during revolution, reducing motor
overloading and costly jams. Waste King’s stainless steel swivel impellers
eliminate the need for reversing
switches and special ”de-jamming“ wrenches.
• Stainless Steel Undercutter Blade located beneath the grind ring snips fibrous
and stringy waste into small particles making them less likely to clog drain lines.
• Hush-Cushions®isolate the unit from metal to metal contact, significantly
reducing noise level. Hush-Cushions®are specially compounded and designed
to withstand vibration and tension, and have a built-in safety splash guard.
COMMERCIAL FOOD WASTE DISPOSER SPECIFICATIONS
150 0 -1
1
1
/
2
HP • Single Phase
150 0 -3
1
1
/
2
HP • 3 Phase
APPLICATION
MEDIUM SIZE RESTAURANTS WITH AS MUCH
DIFFICULT FOOD WASTE AS RESULTS FROM THE
VARIETY OF AN AVERAGE MENU AND HEAVY VOLUME.
MOUNTING SYSTEMS
®
Basic Cone
Assembly (B)
• 12", 15", or 18" Cone
with Swirl Sprays
All-Purpose Cone
Assembly (AP)
• 12", 15", or 18" Cone
with Swirl Sprays
• Silver Guard
• Scrap Ring
Dish Table Cone
Assembly (DT)
• 12", 15", or 18" Cone
with Swirl Sprays
• 12", 15", or 18"
Cone Cover
• Scrap Ring
Trough Mount
Assembly (TM)
• #2536 6” Weld-in
flange for models
with 6” throat
Sink Mount
Assembly (SM)
• #2539 31/2" Bolt-in
adapter for suspended
models with 6” throat
Add desired Waste King water controls, switch or panel control box to complete your package. (See catalog)
Loading...