Wassermann Wapo-Mat III User Manual
Polymerisation Unit
Wapo-Mat III
USER MANUAL
Dear customer,
Thank you for choosing a product from the Wassermann range. Wassermann Dental-
Maschinen incorporates the highest standards of quality and the latest technology.
In order to enjoy maximum performance and years of trouble-free operation, please read
this user manual carefully before you connect this device and start work, and operate the
device according to the recommended guidelines. The operation safety and the
functionality of this device can only be guaranteed if you follow both the general safety
guidelines and the applying laws to prevent accidents as well as the precautions given in
this user manual. We are not liable for any damages which occur due to inappropriate
usage or faulty operation of this device.
Make sure that anyone using this device has read and understood this user
manual.
Keep this user manual in a safe place where it can be referred to as required at
any time.
The unit complies with the relevant EU guidelines.
The unit is subject to the EU guidelines 2012/19/EU (WEEE Directive).
Company address:
Wassermann Dental-Maschinen GmbH
Rudorffweg 15-17
21031 Hamburg, Germany
Phone : +49 (0)40 730 926 -20/ -24 Fax.: +49 (0)40 730 37 24
export@wassermann-dental.com
www.wassermann.hamburg
Erstellt: 06.07.17/ msc Version: 2 Wapo-Mat III: 170980
.
Contents
1 Features.............................................................................................................................4
2 Safety Symbols used in this Manual..................................................................................4
3 Safety Guidelines...............................................................................................................5
4 Responsibility for Operation or Damage............................................................................5
5 Application..........................................................................................................................5
6 Before Starting...................................................................................................................6
6.1 Transport.....................................................................................................................6
6.2 Installation...................................................................................................................6
6.3 Storage........................................................................................................................6
7 Installation/ Commissioning/ Menufunctions......................................................................7
8 Operation.........................................................................................................................13
8.1 General Operating Instructions.................................................................................13
8.2 Operation...................................................................................................................14
9 Warranty...........................................................................................................................14
10 Troubleshooting..............................................................................................................15
11 Maintenance...................................................................................................................16
11.1 Cleaning...................................................................................................................16
11.2 Maintenance............................................................................................................17
11.3 Repairs....................................................................................................................17
11.4 Spare Parts..............................................................................................................17
11.5 Service Hotline 0049 (0)40 730 926 -20/ -24..........................................................17
11.6 Scope of Delivery/ Accessories...............................................................................17
12 Technical Data................................................................................................................18
13 Disposing of the Unit......................................................................................................18
13.1 Information on disposal for countries within the EU................................................18
14 EU Declaration of Conformity........................................................................................19
1 Features
• Compact benchtop unit for long-time and boiling polymerisation
• Fully automatic program sequence, capable to handling 9 flasks simultaneously
• Touchscreen-multifunctional display with minute and degree settings, remaining
time reading
• Powerful, electronically controlled heater for optimal water temperature, low water
level indicated visually and audibly
• Energy-saving tank thermal insulation
• Low maintenance, easy to clean
• All stainless steel construction
2 Safety Symbols used in this Manual
Warning!
This is a warning of risk situations and dangers.
Failure to observe this warning could be life-threatening. These warnings has to
be observed.
Information!
This symbol draws your attention to specific features that has to be observed.
4
3 Safety Guidelines
Configuring and operating this equipment requires precise knowledge and observance
of the instructions in this user manual. The equipment is designed only for its intended
application.
WARNING:
Servicing and repairs should be carried out only by authorised specialists.
Disconnect the power plug before starting any maintenance work.
Make sure that the equipment is connected to the correct power source.
Wear heat-retardant gloves when working with the Wapo-Mat III.
4 Responsibility for Operation or Damage
The responsibility for operating the device lies exclusively with the owner or user if said
device is incorrectly serviced, maintained or altered by persons not employed by an
authorised dealer or if the device is used in a manner contrary to its specified purpose.
The unit has to be maintained and operated in accordance with this user manual.
Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the
nonobservance of these instructions.
Warranty and responsibility provisions contained in the sales and supply conditions of
Wassermann Dental-Maschinen GmbH are not extended by these instructions.
5 Application
The Wapo-Mat III is designed for water-bath polymerisation. All readily available plastics
can be polymerised fully automatically, slowly (up to 99 hours), and at high temperature
(99°C).
Only use the device for this type of application.
5
6 Before Starting
6.1 Transport
Before transporting the unit, ensure that it has been unplugged from the power socket.
Make sure that it is packed correctly in order to avoid accidental damage.
Be sure to check for any transport damage when unpacking the goods. Note down
any damage if found.
6.2 Installation
Remove all packing material and place the unit on an even and stable surface.
Check the parts included in delivery (see 8.5).
Place the unit so that the work area is freely accessible and operation is not
restricted. (Please consider the structural dimensions).
Do not place the unit outdoors.
Before start-up, be sure the device reaches room temperature.
We strongly recommend to install the unit firmly to the discharge system, since it
is equipped with an automatic water overflow
discharge system, i.e. too much filled water runs out automatically, even when
the discharge cock is closed. Furthermore complete emptying for cleaning
purposes etc. is thus simplified.
6.3 Storage
The unit should not be stored or set up outdoors.
In case of long-term storage, the unit must be protected against humidity and dust.
6
Loading...