Wassermann HSS-99, HSS-88 User Manual

Trimmer HSS-99 and HSS-88

Orthodontic Accessories

For Bite Orientated Trimming of Plaster Jaw Models

USER MANUAL

Dear customer,

Thank you for choosing a product from the Wassermann range. Wassermann Dental-

Maschinen incorporates the highest standards of quality and the latest technology.

In order to enjoy maximum performance and years of trouble-free operation, please read

this user manual carefully before you connect this device and start work, and operate the

device according to the recommended guidelines. The operation safety and the

functionality of this device can only be guaranteed if you follow both the general safety

guidelines and the applying laws to prevent accidents as well as the precautions given in

this user manual. We are not liable for any damages which occur due to inappropriate

usage or faulty operation of this device.

Make sure that anyone using this device has read and understood this user

manual.

Keep this user manual in a safe place where it can be referred to as required at

any time.

The unit complies with the relevant EU guidelines.

The unit is subject to the EU guidelines 2012/19/EU (WEEE Directive).

Company address:

Wassermann Dental-Maschinen GmbH

Rudorffweg 15-17

21031 Hamburg, Germany

Phone : [phone]/ -24 Fax.: [phone]

[e-mail]

www.wassermann.hamburg

Erstellt: 20.11.18/ msc Version: 1 164130 / 168140 / 164110 / 168120

.

Contents

1 Features....................................................................................................................................... 4

1.1 Orthodontic Model Table.................................................................................................................4

1.1.1 Figure HSS-99 Model Table KMS according to Begg (Item no. 164130).......................................4

1.1.2 Figure HSS-88 Model Table KMS according to Begg (Item no. 168140).......................................4

1.2 Laser Light Guide for Orthodontic Model Table..............................................................................5

1.2.1 Figure HSS-99 Laser Light Guide for Model Table (Item no. 164110)...........................................5

1.2.2 Figure HSS-88 Laser Light Guide for Model Table (Item no. 168120)...........................................5

2 Safety Symbols used in this Manual.............................................................................................6

3 Safety Guidelines......................................................................................................................... 6

4 Responsibility for Operation or Damage.......................................................................................7

5 Application.................................................................................................................................... 8

6 Before Starting............................................................................................................................. 9

6.1 Transport.........................................................................................................................................9

6.2 Storage............................................................................................................................................9

6.3 Installation of a Trimmer with Orthodontic Accessories Mounted...................................................9

7 Installation/ Start-up.................................................................................................................... 10

8 Operation................................................................................................................................... 10

8.1 General Operating Instructions.....................................................................................................10

8.2 Grinding Process...........................................................................................................................11

8.2.1 Important Advice Concerning the Usage of the Orthodontic Model Table....................................11

8.2.2 Usage of the Orthodontic Accessories......................................................................................... 11

8.3 Adjustment of the Laser Light Guide.............................................................................................12

9 Troubleshooting.......................................................................................................................... 13

10 Care and Maintenance............................................................................................................. 13

10.1 Cleaning......................................................................................................................................13

10.1.1 Cleaning Instructions for the Orthodontic Model Table...............................................................14

10.2 Maintenance................................................................................................................................15

10.3 Repairs........................................................................................................................................15

10.4 Spare Parts.................................................................................................................................15

10.5 Service Hotline [phone]/ -24..............................................................................15

10.6 Installation of Rep-Set LED (Item no. 164132)...........................................................................15

10.7 Installation of Rep-Set Laser (Item no. 164134).........................................................................15

10.8 Scope of Delivery/ Accessories...................................................................................................16

10.9 Warranty......................................................................................................................................16

11 Technical Data......................................................................................................................... 17

12 Disposing of the Unit................................................................................................................ 17

12.1 Information on Disposal for Countries within the EU..................................................................17

13 EU Declaration of Conformity................................................................................................... 18

1 Features

1.1 Orthodontic Model Table

• All parts that come into contact with water are made of stainless steel.

• The seals are made of the latest generation of composite materials.

• The working surface with solid bearing is partially polished and has large slits to

allow the water to flow through to avoid the models sticking during grinding.

• The angle limit stop (Fig. page 8) is easily pivoted away.

1.1.1 Figure HSS-99 Model Table KMS according to Begg (Item no. 164130)

1.1.2 Figure HSS-88 Model Table KMS according to Begg (Item no. 168140)

4

1.2 Laser Light Guide for Orthodontic Model Table

• Laser class 1

• Combination of daylight LED and laser, precise and discreet, without glare or

reflections

• The user can adjust the guide light himself at any time.

• Due to the electrical connections, the installation of the guide light is performed by

our Wassermann Service or one of our licensed specialist companies.

1.2.1 Figure HSS-99 Laser Light Guide for Model Table (Item no. 164110)

1.2.2 Figure HSS-88 Laser Light Guide for Model Table (Item no. 168120)

5

2 Safety Symbols used in this Manual

Warning!

This is a warning of risk situations and dangers.

Failure to observe this warning could be life-threatening. These warnings has to

be observed.

Information!

This symbol draws your attention to specific features that has to be observed.

3 Safety Guidelines

Configuring and operating this equipment requires precise knowledge and observance

of the instructions in this user manual. The equipment is designed only for its intended

application.

WARNING:

Servicing and repairs should be carried out only by authorised specialists.

Disconnect the power plug before starting any maintenance work.

Make sure that the equipment is connected to the correct power source.

The user can adjust the laser light guide himself at any time. Due to the electrical

connections, the installation of the laser light guide is performed by our

Wassermann Service or one of our licensed specialist companies.

6