Warrior S916DOOR, 916DOOR User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

HALF DOORS

INSTALLATION INSTRUCTIONS

S916DOOR / 916DOOR

TJ WRANGLER 1997 - UP

Read all instructions before proceeding.

NOTE: Fits all applications where hard door striker pins and rotary paddle latch
are used.

1. Assemble the door paddle handle, both sides, with bolt and nuts supplied.

2. On the inside of each door, install foam molding per Diagram “A”.

3. Hang door on jeep and check for proper fit. Close door slowly onto paddle

striker being sure that the paddle and striker line up correctly.

Enjoy your new Warrior half doors!

If you need further assistance installing your product, please contact us by email at

[e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS