Warrior JEEP DASHBOARD User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

‘76 TO ‘86 CJ’s

JEEP DASHBOARD

INSTALLATION INSTRUCTIONS

Read all instructions before proceeding.

THIS IS NOT AN EASY INSTALLATION. IF YOU DO NOT FEEL
COMFORTABLE DEALING WITH WIRING AND CABLES, THEN WE SUGGEST
THAT YOU FIND A QUALIFIED INSTALLER TO INSTALL YOUR NEW DASH.

1. Remove old dashboard and save all hardware and mounting bolts.

2. Reinstall new dashboard using original mounting bolts.

3. Use the four (4) 1/8” by 1” bolts that are provided in the hardware kit to install the

speedometer assembly. (Only applicable on parts # 94020 and # 94020PC)

4. Use the two (2) #10 by 3/8” bolts to install the glove box latch bracket to the
dashboard.

5. Install the two rubber “snubbers” in the holes in the dash just above the top corners
of the glove box opening.

6. Install the glove box door using the two _” by _” bolts provided in hardware kit.

7. You must reuse factory glove box bucket and door button latch.

PARTS KIT #950010 includes:
4 - 1/8” X 1” bolts and nuts
2 - Rubber snubbers
2 - _” x _” bolts with nuts and washers
2 - #10 bolts with nuts and washers

Enjoy your new dashboard by Warrior Products!