Warrior 914DOOR User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

ALUMINUM HALF DOORS

INSTALLATION INSTRUCTIONS

WAR 914DOOR

TOYOTA FJ-40 LANDCRUISER

Read all instructions before proceeding.

NOTE: You will need to purchase a Bestop Paddle Handle #245-46 and follow their instruction
for its installation. Modify the striker pin as needed.

1. On the inside of each door, install foam molding per Diagram “A”.

2. Install Paddle Handle and modify striker as needed.

3. Hang door on your vehicle and check for proper fit. Close door slowly onto

paddle striker being sure that the paddle and striker line up correctly. You may
need to “tweak” the hinges to get a perfect fit.

Enjoy your new Warrior half doors!

If you need further assistance installing your product, please contact us by email at

[e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS