Warrior 841 User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

SHOVEL & AXE MOUNT

INSTALLATION INSTRUCTIONS

WAR 841

NOTE: Please read all instructions before starting installation.

1. PARTS BREAK DOWN

2-SMALL BRACKETS
4-LARGE BRACKETS
4-7/16” NUTS AND WASHER
2-1/2” WING NUTS

2. TAKE THE LARGE BRACKET WITH BOLTS WELDED TO IT AND PLACE

THE BOLTS BETWEEN THE BASKET TOP AND BOTTOM TUBES.

3. THEN TAKE THE SMALL BRACKET WITH TWO HOLES AND SLIP

OVER THE BOLTS FROM THE INSIDE OF THE BASKET. PLACE THE 7/16” WASHERS
OVER BOLTS AND THEN THE LOCK NUTS AND TIGHTEN INTO PLACE AS DESIRED.
SPACE THE OTHER LARGE BRACKET WITH BOLTS APPROXIMATELY 18” APART
AND REPEAT STEP 1 AND 2.

4. NOW TAKE THE OTHER LARGE BRACKET WITH ONE HOLE AND SLIP
IT OVER THE BOLT AND START THE _” WING NUT. THEN
REPEAT ON OTHER MOUNT. SLIP THE SHOVEL AND AXE INTO TOP

AND BOTTOM CLAMPS AND TIGHTEN WING NUTS.

5. CHECK WING NUTS AFTER EVERY OUTING OFF ROAD.

If you need further assistance installing your product, please contact us by email at

[e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS