Warrior 51510, 51510C User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

CJ & YJ REAR BUMPER

INSTALLATION INSTRUCTIONS

WAR 515, 515C

50510, 50510C, 51510, 51510C

Bumpers are designed to fit over existing rear cross member support.

1. Remove old bumperettes from vehicle.

2. Be sure that area where bumper will be mounted is flat and free of any damage.

3. Install new bumper with enclosed hardware. Tighten 7/16” nuts to 50ft / lbs.

Re-torque after your initial test drive.

If you need further assistance installing your product, please contact us by email at

[e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS