Warrior 510 User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

BUMPER WITH HITCH

INSTALLATION INSTRUCTIONS

WAR 510

1. Remove stock “Bumperettes”. Retain bolts, washers, and nuts for installing your

new Bumper.

2. Install Bumper using bolts removed in #1 above. Tighten to manufacturer’s
suggested torque. Be sure there is a washer under the bolt head and between the
nut and the frame. (Washers are not provided)

3. The two bolts and spacers provided are to be used on the bottom of the Bumper.
Tighten bolts to 50 ft. lbs. torque.

4. ENJOY YOUR NEW BUMPER!

If you need further assistance installing your product, please contact us by email at

[e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS