Warrior 2350 User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: [phone]
Fax: [phone]

[e-mail]
www.warriorproducts.com

LICENSE PLATE FAIRLEAD MOUNT

INSTALLATION INSTRUCTIONS

WAR 2350

1. Begin by unpacking your kit. You should find a mount plate, two clip mechanisms, and an

assortment of bolts and nuts.

2. Use the supplied four bolts and nuts to install the clip mechanisms to the mount plate. These

clips mount on the back side of the plate, opposite the threaded studs.

3. With the clip mechanisms bolted up and tight, slide your license plate over the 4 threaded studs.

4. Affix a flat washer, external lock washer, and then an acorn nut to each stud.

5. Your mount is now full assembled and can now be installed and uninstalled from your roller

fairlead by simply pressing it into place.

For more information on Warrior Products Jeep Parts and Accessories, please visit us on the web at

www.warriorproducts.com. If you need further assistance installing your product, please contact us by

email at [e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS