Warrior 1502 User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

WINDSHIELD MIRROR RELOCATION BRACKET

INSTALLATION INSTRUCTIONS

WAR 1502 - 2003 TJ WRANGLER

Congratulations on your purchase of Warrior Products Windshield Mirror Relocation Bracket for your Jeep.
Be sure to open the box and examine the contents before beginning. Read these instructions completely before
starting your installation.

1. The Warrior Mirror Relocation Bracket attaches to the side of your windshield, on the lower part of the windshield
hinge.

2. Remove the two bolts on the side of the windshield hinge. Remove one bolt at a time, CAREFULLY, to avoid
dropping backing nuts located inside the framework.

3. Mount the Warrior Mirror Relocation Bracket using the two (2) tapered stainless steel bolts provided for each side.

4. Remove your stock mirror from your door by unscrewing the three bolts in the door.

5. Mount the mirror to the Relocation Bracket using the _” bolts and nuts provided.

6. When finished, be sure to go back and check the tightness of all bolts.

If you need further assistance installing your product, please contact us by email at

[e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS