Warrior 1135-RJR User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

MAXI-BREEZER TOP

INSTALLATION INSTRUCTIONS

WAR 1135 / RJR CG529B

YJ’92-’96

NOTE: Installation of this top requires a windshield retaining channel, if you do not have one it can be
purchased at your local offroad shop- Bestop part #51209-01 or OutLand part #90101

1. Install the windshield retaining channel if needed

2. Insert folded webbing at front edge into your windshield channel

3. Wrap & attach rear straps, cinch until you have proper tension from front to back

4. Long center strap goes to footman loop on windshield frame

5. Wrap & attach side straps same as rear, cinch until you have proper tension

6. Attach rear straps firmly

7. Adjust all straps until you have a tight fit

Your Breezer Top is now fully installed.

Enjoy your new Breezer Top!

If you need further assistance installing your product, please contact us by email at

[e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS