Warrior 1120-RJR User Manual

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone [phone]

Fax [phone]

[e-mail]

BREEZER TOP

INSTALLATION INSTRUCTIONS

WAR 1120 / RJR CG525B

TJ’97-’02

NOTE: Installation of this top requires a windshield retaining channel, if you do not have one it can be
purchased at your local offroad shop- Bestop part #51235-01.

1. Install retaining channel if needed

2. Insert folded webbing strip into slot in channel

3. Attach the corner straps & cinch until you have proper tension

4. Attach center strap to footman loop on windshield frame

5. Wrap two shorter straps around Roll Bar and cinch

6. Adjust all straps until you have a tight fit

Your Breezer Top is now fully installed.

Enjoy your new Breezer Top!

If you need further assistance installing your product, please contact us by email at

[e-mail] or call us at [phone].

THANK YOU FOR PURCHASING WARRIOR PRODUCTS