Quickstart Guide
StreamHD Mac Edition – SWP130A
1. SOFTWARE INSTALLATION:
Prior to installing the Warpia StreamHD software it is important to make sure there
is no prior installation of Wireless USB or Display Link software from Warpia or
other companies. IF YOU HAVE THIS SOFTWARE IN YOUR SYSTEM, THIS WILL
CAUSE THE STREAMHD SOFTWARE TO NOT WORK PROPERLY.
If you see either Wireless USB or Display Link programs, first uninstall them before
continuing. Next, Insert the StreamHD installation CD into the PC and begin the
software installation by running the Warpia UWB Installer file. Ensure that the PC
Adapter is NOT plugged into the PC at this time.
2. HARDWARE INSTALLATION:
tab at the top of the Color LCD Wind
After the software has been installed, insert PC Adapter into an available USB port.
Plug the Receiver Base into an electrical outlet using the power cord provided.
Connect the Receiver Base to the TV/Monitor/Projector using an HDMI
or VGA cable with the appropriate sound cable when required.
(cables not included)
3. ESTABLISHING INITIAL WIRELESS CONNECTION WITH
TV/MONITOR/PROJECTOR:
Open the UWB Connection Manager by clicking on the black UWB Connection
Manager icon located in the top Menu Bar of your desktop.