Warpia SWP120A User Manual

Quickstart Guide

StreamHD – SWP120A Rev B

1. SOFTWARE INSTALLATION:

Prior to installing the Warpia StreamHD software it is important to make sure there
is no prior installation of Wireless USB or Display Link software from Warpia or
other companies. IF YOU HAVE THIS SOFTWARE IN YOUR SYSTEM, THIS WILL
CAUSE THE STREAMHD SOFTWARE NOT TO WORK PROPERLY

If you see either Wireless USB or Display Link programs, first uninstall them by
going to the Control Panel- Programs and Features section and clicking on the
Uninstall tab.

Next, Insert the StreamHD installation CD into the PC and begin the software
installation by running the Setup.exe file. Ensure that the PC Adapter is NOT
plugged into the PC at this time.

2. HARDWARE INSTALLATION:

ure t

+

o

After the software has been installed, insert PC Adapter into an available USB port.

Plug the Receiver Base into an electrical outlet using the power cord provided.

Connect the Receiver Base to the TV/Monitor/Projector using an HDMI
or VGA cable with the appropriate sound cable when required.
(cables not included)

3. ESTABLISHING INITIAL WIRELESS CONNECTION WITH
TV/MONITOR/PROJECTOR:

Open the UWB Connection Manager by double-clicking the UWB Connection
Manager icon located in the System tray/Notification Area of your Windows

®

desktop.