Warpia SWP100A Quick Start Guide

Quick Start-AV_Adapter_HVGA 4.pdf 1 9/16/2009 4:37:25 PM

GETTING STARTED

Note: For further information, please refer to the User Guide included in the Installation CD

DEVICE

ADAPTER

PC ADAPTER

A/V BASE

The package includes:
CD, PC Adapter, A/V Adapter
(Device Adapter + A/V Base),
and power supply.

For vertical mounting:
Place the A/V Adapter on a
vertical surface (projector,
wall, display).

Insert the CD and install
software drivers. (A new gray
icon appears in system tray

1

2

3

For table top positioning:

1. Remove Device Adapter from
A/V Base.

2. Slide shutter to show
top USB port.

3. Re-attach Device Adapter.

PC ADAPTER

Plug the PC Adapter to a
USB port on your PC
(Tray icon turns red ).

Connect the A/V Adapter using an
HDMI cable or using VGA and audio
(3.5mm plug) cables. Connect the
power cable.
You’re done! (Tray icon turns green
,display icon is on ).

Quick Tips for Best Performance

Playing video from your PC?

1. Use Extend Mode, and limit the
extended screen resolution
to 720p (1280x720).

2. If available it is recommended to
use Optimize for Video Mode.

Streaming video from the internet
(e.g. Youtube)?
Make sure to Disable Hardware
Acceleration on your Flash Player.

Using Windows Vista?
Use the AERO Desktop Theme.
Problems?
Right-click the Wireless USB Manager
taskbar icon and select Help,
or see Troubleshooting in the User
Guide (available on the installation CD).

Wireless USB A/V Adapter Set