Warner Electric 5300-101-001 User Manual
Collector Ring Mounting Instructions
0.56
(14.2)
0.69
(17.5)
4.0
(101.6)
2.94
(74.7)
B.C.
90°
120°
3.255 +0.00 / -0.002
(82.7 +0.00 / -0.05)
Customer's Hub
3.253 +0.002 / -0.000
(82.62 +0.05 / -0.00)
of W.E.B. & C. Co.
5300-749-001
16
Dia.
3.5
(0.14)
Dia. Hub
0.38
(9.7)
0.53
(13.5)
Min. Full Thds
Alternate
Mtg
Set Screw
Mtg
Contact Wire Holes
Locate this
between magnet
mounting screws
C'Bore Hub
Min. Full Thds
Min. on Hub &
5300-101-001
Ring
C
L
C
L
40
3
40
2
40
1
4.242 (107.75
)
4.226 (107.34)
Dia.
3.25
(82.6)
B.C.
1.125
(28.6)
0.31
(7.9)
0.56
(14.2)
for Ring 5300-101-001
P-1371
819-0034
Ring number 5300-101-001 includes collector
ring and mounting screws.
Installation Instructions
Failure to follow these
instructions may result in product damage,
equipment damage, and serious or fatal injury
to personnel.
Alternate mounting (with washers and screws)
General Information
On finished hub, drill and tap two holes for
#10-32 screws on 2-15/16 B.C. equally spaced
as shown.
Counterbore 21/32 diameter to depth shown.
Mount ring to hub and secure with 2 sems
(40/1).
Selection type of mounting desired – i.e.
Mounting (with set screws), or Alternate
Mounting (with washers and screws). Customer
shall machine hub to diameters called for and
axially to dimensions shown to create a
shoulder against which the collector ring shall
seat. This should to be used as a locator for all
Mounting (with set screws)
On rough hub, drill and tap three holes for #8-32
screw on 3-1/4 B.C. equally spaced as shown.
Machine hub as described under “General
Information”. Mount ring to hub and secure with
3 set screws (40/2). Lock screws in place with
prick punch.
Warner Electric 800-825-9050
drill, tap and counterbore operations. Mount
collector ring per selection mounting. Assemble
magnet lead wires thru holes in collector ring.
Secure screws (16/1) into wires and lock in place
with prick punch. Screw, when properly seated
into wire, shall be below surface of brass slip
ring. Cut off excess wire and coat exposed ends
with insulating varnish or sealing wax.
Warranty
Warner Electric LLC warrants that it will repair or replace (whichever it deems advisable) any
product manufactured and sold by it which proves to be defective in material or workmanship
within a period of one (1) year from the date of original purchase for consumer, commercial or
industrial use.
This warranty extends only to the original purchaser and is not transferable or assignable without
Warner Electric LLC’s prior consent.
Warranty service can be obtained in the U.S.A. by returning any defective product, transportation
charges prepaid, to the appropriate Warner Electric LLC factory. Additional warranty information
may be obtained by writing the Customer Satisfaction Department, Warner Electric LLC, 449
Gardner Street, South Beloit, Illinois 61080, or by calling 815-389-3771.
A purchase receipt or other proof of original purchase will be required before warranty service is
rendered. If found defective under the terms of this warranty, repair or replacement will be made,
without charge, together with a refund for transportation costs. If found not to be defective, you will
be notified and, with your consent, the item will be repaired or replaced and returned to you at
your expense.
This warranty covers normal use and does not cover damage or defect which results from
alteration, accident, neglect, or improper installation, operation, or maintenance.
Some states do not allow limitation on how long an implied warranty lasts, so the above limitation
may not apply to you.
Warner Electric LLC’s obligation under this warranty is limited to the repair or replacement of the
defective product and in no event shall Warner Electric LLC be liable for consequential, indirect,
or incidental damages of any kind incurred by reason of the manufacture, sale or use of any
defective product. Warner Electric LLC neither assumes nor authorizes any other person to give
any other warranty or to assume any other obligation or liability on its behalf.
WITH RESPECT TO CONSUMER USE OF THE PRODUCT, ANY IMPLIED WARRANTIES WHICH
THE CONSUMER MAY HAVE ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF
ORIGINAL CONSUMER PURCHASE. WITH RESPECT TO COMMERCIAL AND INDUSTRIAL
USES OF THE PRODUCT, THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED BY OPERATION OF LAW OR
OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and
you may also have other rights which vary from state to state.
Changes in Dimensions and Specifications
All dimensions and specifications shown in Warner Electric catalogs are subject to change without
notice. Weights do not include weight of boxing for shipment. Certified prints will be furnished
without charge on request to Warner Electric.
Warner Electric LLC
31 Industrial Park Road • New Hartford, CT 06057
815-389-3771 • Fax: 815-389-2582
www.warnerelectric.com
P-1371 • 819-0034 6/12 Printed in USA
Loading...