ASSEMBLY
This appliance must be used in accordance with any prevailing electrical code and relevant
electrical wiring rules and regulations and in particular those regulations that cover use of
appliances and accessories in damp situations such as bathrooms, showers, laundries and
other areas with fixed water containers.
Your Warmrail comes complete with two allen bolts and an allen key which you will find in
a small plastic bag. Use the bolts to secure the legs to the Heated Towel Stand. Remove all
the components from the carton and make sure that all parts are present. If any parts are
missing, do not attempt to install the appliance, instead call Warmrails on 877.927.6724.
1. Your Warmrail requires minimal assembly prior to use. To assemble you may have to
turn the unit upside down or lay it flat on an elevated surface to attach the legs.
2. Place Leg Connector in between bottom of Heated Towel Stand post and top of
curved leg. See Fig. 1
3. Using the allen key, insert the allen screw provided.
4. Repeat steps 1-3 to install the second leg.
5. Once both legs are securely fastened to the Warmrail, turn it over and stand it back on
its feet. Remove any bags, ties, etc, making sure to take note of any warning labels.
6. Plug the cord into a 120V outlet and turn the Warmrail on at the switch.
7. Do not use your Warmrail if it is not properly assembled.
Optional wall mounts available. Please contact Warmrails –Toll Free 877.927.6724
SAFETY INFORMATION
When using any electrical appliance, basic safety precautions should always be observed.
READ THESE INSTRUCTIONS CAREFULLY
• Do not use this appliance for other than its intended use.
• To avoid a hazard, the Heated Towel Rack MUST NOT be used to hold towels or
any other articles that have been in contact with oil, petroleum based products or
dry cleaning fluids.
• Use this appliance only on the voltage specified on the rating plate, or elsewhere
in the instructions.
• Regulations require that only authorized persons carry out electrical work. For
your own safety and that of others, ensure this is done.
• Do not store your Heated Towel Rack while hot or still connected to the power
supply.
• Do not immerse the Heated Towel Rack in water or any other liquid.
• Do not allow the cord set to come into contact with heated surfaces during
operation.
• This product should not be used outdoors.
WARNINGS
HIGH OPERATING TEMPERATURE:
• This towel warmer operates at high temperature that can cause burns.
• Do not touch surfaces of the towel warmer while the warmer is in operation.
• Do not allow unsupervised children in the vicinity of the towel warmer; and warn
children of hot surfaces.
TO AVOID THE POSSIBILITY OF ELECTROCUTION:
• Do not immerse towel warmer in water or any other liquid.
• Do not place towel warmer in a location where it may fall into a tub or shower, or
otherwise become immersed in water; and if the towel warmer falls into water,
immediately unplug it. Do not reach into the water.
SPECIFICATIONS
HEIGHT WIDTH DEPTH
40 1/2" 28 1/8” 15”
Supply: 120 volts a.c. 60 Hz, single phase