SCV-DUAL
SCP-120
FEATURES & BENEFITS
Automatic snow and ice melting controller
minimizes operating costs.
PREMIUM SNOW MELT CONTROL
VALUE SNOW MELT CONTROL
Automatic voltage selection operates from
100VAC-240VAC.
Adjustable hold-on time and temperature set
point provides flexibility for a wide range of
applications.
Weather-resistant NEMA 3R enclosure.
Hold-on timer continues heater operation after
snow stops to ensure complete melting.
Sno-Test™ automatic testing and manual heater
cycle for system testing.
Simple four-wire installation.
Minimize
Operating Costs
Automatic and
manual-override
operator controls
C-UL-US Listed for Temperature
Regulating Equipment.
Easy to Operate
0101
SCV-DUAL
SCP-120
About the Value Snow Melt Control
This configurable aerial snow-melting controller makes automatic snow melting cost-eective in even the
smallest applications. Heaters operate at temperatures below the default set point (38°F or 3.3°C) only
when the sensor detects precipitation at temperatures below 38°F. Plus, the adjustable hold-on period (3
hours default) continues heater operation after snow stops to ensure complete melting.
The SCV-DUAL controller includes an internal magnetic reed switch used for manual heater cycling, as
well as configuring the temperature set point and the hold-on time. The controller operates from 100 to
240 VAC to work with a wide variety of applications. It also controls heater loads up to 16 amps.
VALUE SNOW MELT CONTROL
PRODUCTS
SMP
Snow Melting
Plaque
SCV-DUAL
Value Snow
Melt Control
RLY-Series
Relay Panels
(Optional)
02
VALUE SNOW MELT CONTROL
SCV-DUAL
Specifications
SCV-DUAL Value Snow Melt Control
Area of use Nonhazardous locations
Approvals UL Listed 109R Type 873 Temperature Regulating Equipment
Protection NEMA 3R
Cover attachment Polycarbonate with machine screws
Entries 1 x 3/4” entry (bottom)
Material Polycarbonate
Mounting Pole mount
Dimensions 4.6” (W) x 6.1” (H) / 117mm (W) x 155mm (H)
Supply voltage ETI PN 24619: 100VAC – 240VAC; 50/60 Hz
Load 3 amp maximum inductive
16 amp maximum resistive
Heater Hold-On timer 0, 1, 3 (default) or 5 hours; configured by magnetic reed switch
Set point temperature O (moisture only), 36°F, 38°F (default), 40°F ; configured
by magnetic reed switch
Status indicators SUPPLY (green): Power on; will flash while in configuration mode
HEAT (yellow): Heating cycle in progress
Wire and Cable Ratings
Power cable Size for heater load (16 amps maximum)
Heater cable Size for maximum heater load
Environmental
Operating temperature –40°F to 104°F (–40°C to 40°C)
Storage temperature −67°F to 167°F (−55°C to 75°C)
RLY-Series
Model RLY-4PL
Enclosure NEMA 1
Dimensions 10” x 8” x 4” (254mm x 203mm x 102mm)
Contains 2 relays for a total of 4 poles
Controls 4 circuits at 120 VAC or 277 VAC or 2 circuits at 208 VAC or 240 VAC
Model RLY-8PL
Enclosure NEMA 1
Dimensions 12” x 10” x 4” (305mm x 254mm x 102mm)
Contains 4 relays for a total of 8 poles
Controls 8 circuits at 120 VAC or 277 VAC or 4 circuits at 208 VAC or 240 VAC
Model RLY-12PL
Enclosure NEMA 1
Dimensions 16” x 12” x 4” (406mm x 305mm x 102mm)
Contains 6 relays for a total of 12 poles
Controls 12 circuits at 120 VAC or 277 VAC or 6 circuits at 208 VAC or 240 VAC
NOTE: Relays do NOT contain circuit breaker devices.
Optional for loads under 16 AMPS.
Required for larger AMP loads
ORDERING
Accessories
SMP Snow Melting Plaque
RLY-Series Relay Panels (Optional)
LIMITED WARRANTY
WarmlyYours’ two year limited warranty covering defects in workmanship and materials applies.
Contact Warmly Yours at (800) 875-5285 or go to www.WarmlyYours.com for complete information
For more information, operating and
technical manuals, please refer to
www.warmlyyours.com.
*Product specifications
are subject to change.
03
Loading...