WarmlyYours IPEMGLSWHT0600, IPEMGLSMIR0600 User Manual

Ember Infrared Heating Panels

Installation Manual

Free Design Service • 24/7 Installation Support • [phone] • www.WarmlyYours.com

Sections: page

1. General Product Information .......................................................................................................... 1

1.1. General Information About Infrared Radiant Panels ......................................................................... 1

1.2. General Information About Ember Panels ....................................................................................... 1

1.3. Various Applications And Models ..................................................................................................... 2

2. Safety Notes Before First Use .......................................................................................................... 3

2.1. General Safety Instructions .............................................................................................................. 3

2.2. Special Safety Instructions ............................................................................................................... 3

3. Instructions For Installation and Use ........................................................................................... 4

3.1. Instructions For Mounting ................................................................................................................ 4

3.2. Instructions For First Use ................................................................................................................. 5

3.3. Instructions For Regular Use ............................................................................................................ 6

3.4. Instructions For Cleaning And Maintenance .................................................................................... 6

3.5.Instructions For Repair ...................................................................................................................... 6

4. Technical Details ............................................................................................................................... 7

5. Environmental Protection ................................................................................................................ 8

6. Declaration of Conformity .............................................................................................................. 9

6.1. Transportation and Delivery .............................................................................................................. 6

7. Occurrence of an Error ...................................................................................................................... 10

8. Warranty .............................................................................................................................................. 11

Table of Contents

Thank you for purchasing an infrared heating panel produced by

INFRAPOWER MANUFACTURING LTD., sold by WARMLYYOURS RADIANT HEATING.

THIS VERSION OF THE INSTRUCTION MANUAL HAS BEEN TRANSLATED FROM THE ORIGINAL GERMAN
VERSION APPROVED BY TÜV RHEINLAND GERMANY. WE DO NOT TAKE ANY RESPONSIBILITY FOR THE
TRANSLATED VERSION. PLEASE ASK YOUR DEALER FOR THE ORIGINAL GERMAN VERSION.

EMBER heating panels operate on electricity. According to this denition, these devices can be dangerous. It is,
therefore, necessary to read these instructions carefully before use. If you have questions, we are also happy to
help. Keep this manual in the vicinity of the device.

1.1 General Information about Infrared Radiant Panels

EMBER radiant panels are direct heating systems that use the principle of infrared heat radiation. They have very low energy

consumption and achieve a pleasant and comfortable indoor climate. The heat conductor is carbon ber.

EMBER panels convert electrical energy into heat with nearly 100% efciency. A special coating on the surface is optimized so

as to achieve maximum heat dissipation in the wavelength range from 7 to 10 um.

EMBER radiant panels heat a room just as the sun warms the earth. EMBER brings this infrared heat into your home,

minimizing your heating costs. The panels also have a healthful effect on the human body. The heat has a positive effect on the

human heart, especially for the elderly, children and newborns. It also has a very effective impact on people who are restricted
in their movement. The use of EMBER panels can improve your overall health.

When the panels are in use, only 80% of traditional heating is needed, because the panels can boost the feeling of warmth
in a room. Compared with traditional heating, savings up to 30% can be achieved with EMBER infrared heating panels. In
transitional periods, this can rise to 60%.

1.2. General Information about Ember Panels

EMBER radiant panels can be used in different rooms and environments (for each application, see Section 1.3.). Depending

on the environment and nature of the desired application, various models are recommended (to nd the best model for

you, please contact your dealer). For all models and applications, be sure to follow the safety instructions for installation (see
Section 3.1.).

EMBER radiant panels heat up in about 5 to 10 minutes. Your room will not feel warmer immediately, because the cold objects

in the room (furniture, walls, ceilings, oors, etc.) need to warm up rst. Once these things are heated, the warmth will spread

throughout the room and you will be able to reduce the length of time in which the heating panel is in operation. Hence, you
can save a great amount of energy.

Depending on which EMBER model you have selected, the surface will heat from 176 to 257ºF (80 to 125 °C). All EMBER
heating panels are equipped with temperature sensors that regulate the surface of the unit so that they do not overheat.

EMBER heating panels can also be used for different environmental applications. For further details, see Section 1.3.

1

General Product Information

Section 1

2

General Product Information

1.3. Various Applications and Models

1.3.1. Ceiling Panels

In order to heat a room optimally, EMBER panels should be attached to the ceiling. This optimizes the radiation. Plus, it

saves space.

EMBER panels are light enough to be integrated into existing ceiling systems. Please note the necessary details for
instructions described in Section 3.1.

1.3.2. Wall Panels

EMBER wall panels can be optimally used as a supplementary or primary heating system. Due to their thin and light
structure and the differences in surface design, the panels are compact and suitable for almost all walls (please see the
instructions for installation in Section 3.1.). Depending on the mounting position, EMBER wall panels have a convection
heat share of almost 0%.

Section 1

2.1. General Safety Instructions

• All EMBER heating panels are only suitable for use as a heating element. Any improper use can present a signicant danger

to people, animals and the environment.

• EMBER heating panels are not intended to be used by people (including children) with reduced physical, sensory or mental
abilities or lack of experience and/or knowledge, unless they are supervised by a person responsible for their safety or have
received instructions on how to use the device.

• All heating panels must be kept away from children. Children should be supervised to ensure they do not play with
the device.

• EMBER heating panels are not suitable for use in rain or wet conditions, under water, and for any non-intended use.

• For all EMBER heating panels, please observe the following installation instructions (see Section 3).

• Each EMBER heater has a built-in safety switch that turns off the heating element automatically if it is overheating. By
unplugging the unit and waiting for about 10 to 15 minutes, the safety switch is activated automatically and the unit is
operational again.

2.2. Special Safety Instructions

• DO NOT COVER. Warning: To avoid overheating, the heater must not be covered. Never cover the EMBER heating panel. This

can cause heat buildup.

• The heater is very hot when in use (depending on model, up to 125° C or 257ºF). Contact could lead to serious burns.

• Each EMBER heater is equipped with a power cord and plug. By using an optional adapter, you can operate the heater with
a room thermostat. Make sure that nobody can trip over the cable. Protect the unit from overloading the circuit breaker, and

operate the equipment only as specied on the nameplate.

• Do not use the EMBER heating panel if the power cord or plug is damaged. This should be checked before each use. Do not

drag or tear the main cable. Do not scrub the cable, and do not clamp the cable. Neither the cable nor the plugs may be

repaired or replaced. In case of damage, contact the manufacturer or distributor.

• Never dip EMBER heating panels into water or put them in water. Also, people should never touch the heating element

while they are in the bathtub or shower. Do not use this device near a bathtub shower or swimming pool.

• The heating panel can only be operated in a permanently mounted position (for more information on mounting, see Section

3.1.).

• In case of damage to the heating panel or the circuit cable, immediately disconnect it from the circuit. (For further
information about the warranty process, see Section 8).

• To prevent damage and accidents, never open the device (see the detailed information described in Section 3.5.). If the
device is opened, warranty and liability claims are not approved.

3

Safety Notes Before First Use

Section 2

4

Instructions for Installation

3.1 Instructions for Mounting

EMBER panels must be mounted with the supplied original mounting hardware (aluminum proles at the back of the

panels and screws included). For panels that are used without the original mounting hardware, the warranty, liability and
consequential damages are void.

EMBER panels must only be used in the manufacturer-related frames.

For panels that are used without the original frame, the warranty, liability and damages are void.

3.1.2. General Instructions for Mounting

Depending on the desired application (see Section 1.3.), different types of installation are provided. All EMBER panels come

with original mounting hardware (aluminum proles at the backside of the panels and screws for wall/ceiling mounting are

enclosed).

• Make sure that the power plug is not plugged in during assembly. During installation of the unit, also make sure that the

heating panel is not in the “ON” position.

• Do not make any holes in the heating panel. If holes have been made for any reason, do not operate the device. Please
contact the manufacturer or dealer from whom you purchased the product.

• To ensure a quick and easy installation, use the enclosed mounting template and follow the instructions for installation as
described in detail.

• If the device is installed in children’s rooms or rooms accessible to children, make sure that the device is suspended at
least 4 feet above the ground.

• DISTANCE TO BACKSIDE: EMBER panels output convection heat (not infrared radiation) at the backside only. Make sure

that the distance from the wall to the back of the heating panels (metal/aluminum plate) is at least 1 inch in order to
ensure ventilation. This distance is always provided when you use the standard mounting hardware. If you use a different
mounting system than the original, warranty as well as liability for consequential damages is void.

• DISTANCE TO FRONTSIDE: EMBER panels send out infrared radiation only on the front side. Make sure that there is a

minimum distance of 10 inches between the front of the panel and any objects.

• Do not mount the heating panel near a shower, tub or swimming pool. Make sure that the heating panel cannot be
touched by any person who is in the bath or shower. In case of installation in wet rooms, the installation must be done by a
licensed electrician.

• Never mount the heating element in front of or immediately below a socket.

• Make sure that the plug is accessible after installation of the panels and, if needed, can be immediately pulled.

• If the heating panel is integrated in a permanent electrical installation or connection, a correctly sized circuit breaker is
needed. This connection has to be carried out by a qualied professional.

Section 3

5

3.1.3. General Information on Positioning

With infrared radiation, improper positioning can result in certain areas of space in a room experiencing a “shadow” effect.
Optimal positioning can avoid shadow effects. For detailed information about the optimal positioning, please consult your

dealer where you purchased the EMBER panel.

3.2. Instructions for First Use

• Note that Section 3.1. mentioned instructions for assembly.

• Now connect the heating panel to a perfectly placed and installed pair of sockets (note the instructions mentioned above for

safety).

• Now the heating panel can be put into operation. The startup heating time is approximately 5 to 10 minutes. Your room
will not feel warmer immediately, because the cold objects in the room (furniture, walls, ceilings, oors, etc.) need to warm
up rst. Once these surfaces are heated, the warmth will spread throughout the room and you will be able to reduce the

duration of time in which the heating panel is in operation.

Instructions for Installation

Section 3

Good Positioning Bad Positioning

Good Positioning Bad Positioning

6

Instructions for Installation

3.3. Instructions for Regular Use

• Do not place any clothing or other similar items on the heating element (FIRE DANGER). A sign is mounted on the front of

the panel and must not be removed.

• When heating up or cooling down, the expansion and contraction of the heating panels can cause minimal noise. This is
normal.

• The heater is very hot in use. Contact could lead to serious burns.

• All EMBER heating panels are equipped with temperature sensors that regulate the surface of the unit and prevent it from
overheating.

• If you do not use the heating panel for an extended period of time, it is advisable to unplug the unit.

• The surface of the heating panels should be kept clean. Please refer to the instructions in Section 3.4.

3.4. Instructions for Cleaning and Maintenance

EMBER panels do not require any maintenance. If you nd any irregularities, unplug the power cord immediately and

contact your dealer, from which you purchased the panel.

To achieve the best results when cleaning, follow these steps:

• Before cleaning, unplug the unit.

• The heater is very hot during use (depending on model, up to 125° C or 257ºF, BURNING DANGER). Before you clean the

heating element, let it cool down for about 10 to 15 minutes.

• Do not immerse the heating panel in water or spray it off. Never use a wet cloth. Clean with a duster or slightly dampened

cloth. Make sure that the heating element is completely dry before powering on the unit.

• Do not use abrasives or other harsh cleaning products or rough cloths.

• For ceiling panels, occasionally remove any dust on the top with a vacuum cleaner.

3.5. Instructions for Repair

• In case of irregularities with the devices, always contact your dealer. Do not repair them yourself.

• If a malfunction occurs, immediately disconnect the power cord. Do not use, or stop use immediately, if the unit is
damaged, especially if the line cord, housing or heating panel itself are affected.

• In addition, we ask you to carefully read the details in Section 8 about the processing of warranty claims.

• Never remove the label or the warning sticker. The data on the nameplate are important for the warranty.

Section 3

7

4. Technical Details

The following information provides general information applicable to the EMBER radiant panel line. Please nd additional
information about performance, size and surface temperature on the sticker located on the back of the panels.

Technical Details

Section 4

INFRARED PANEL

POWER

INPUT

MODEL

600W

110V 60Hz

Environmental Protection

5. Environmental Protection

Please note the following guidelines for disposing of packaging materials:

• Packaging material made of cardboard can be recycled.

• Keep plastic foils or packaging out of the hands of children. Please recycle the protective lm properly.

• The heater, or parts thereof, may not be disposed with normal household waste, but must be taken to a collection point for
recycling of electronic and electric devices. The symbol on the product, on the packaging and on this manual indicates this.

• By recycling, you make an important contribution to protecting our environment. Please ask for details at your local
authority or the appropriate disposal location.

Section 5

8

6. Declaration of Conformity

We hereby declare that the heating panel to which this declaration relates, is compliant with the following guidelines and

standards:

UL 499:2005 R3.11 EN60335-1
CAN/CSA C22.2 No. 60335-1-11 EN60335-2-30
CAN/CSA E60335-2-30:2001 EN50366

6.1. Transport and Delivery

Each individual heater element is, after nal testing, packaged securely in suitable boxes and shipped. In order to provide

redress for damage during transit, we ask that you unpack the heating panel in the presence of the delivering carrier in case
you notice damage on the corresponding transport document or packing slip.

Declaration of Conformity

Section 6

9

7. Occurrence of an Error

Dear Customer,

Thank you for choosing a product from WARMLYYOURS RADIANT HEATING. Should there be an issue with your device,
we ask you to rst contact the dealer from which you purchased the device. Should the problem not be solved in this

way, please send your device back to the dealer and enclose the following warranty card.

• WARMLYYOURS provides on all EMBER radiant panels a 5-year warranty, from the date of purchase. Proof of

purchase is a guarantee slip.

• Excluded from the warranty are external optical defects, beyond the damage caused by improper installation or
faulty handling, or removed or obliterated serial numbers or mechanical damage.

• Repairs by unauthorized third parties voids the warranty claim.

• The warranty covers the repair or replacement of the defective part. Labor is not included.

Please call WarmlyYours at 800-875-5285 for 24/7 troubleshooting assistance.

Occurrence of an Error

Section 7

10

Warranty Card

Section 8

EMBER® Warranty Information

Please complete and return the Warranty Card
(online or you may send/fax this form)

www.warmlyyours.com/en-US/radiant-panel-heating/warranty/register
or call [phone] to register via phone or Fax us at [phone]

WarmlyYours.com Inc. warrants the WarmlyYours EMBER® (“the
Product”) to be free from defects in materials and workmanship for
5 years from the date of sale, provided that the Product is installed in
accordance with the accompanying Installation Manual, and any special
written design or installation guidelines provided by WarmlyYours.com
Inc. for this product, the National Electric Code (NEC) and Canadian
Electrical Code (CEC), and all applicable local building and electrical
codes. WarmlyYours makes no claim as to the amount of room
temperature rise, the amount of time it takes to reach a given room

temperature, or the nal room temperature due to the innumerable

variables in building construction and environmental conditions. Any
suspected defect must be reported immediately upon discovery. The
determination of such a defect must be made by WarmlyYours. com
Inc., or its authorized representative only. This warranty is null and void
if the product is improperly installed, improperly operated, or abused.

WarmlyYours. com Inc. assumes no responsibility under this warranty
for any damage to the product caused by any trades person, or visitor
on the job site, or damage caused as a result of post installation
work. Under this Limited Warranty, WarmlyYours.com Inc. will provide
the following remedy: If the Product is determined to be defective in
materials and workmanship, and has not been damaged as a result of
misuse or misapplication, WarmlyYours.com Inc. will refund the original
purchase price or replace the Radiant Panel, at WarmlyYours.com Inc.
expense. WarmlyYours.com Inc. will not be liable for the labor required
to replace the Radiant Panel. The Limited Warranty is null and void if
the project owner or his representative attempts to repair the Product

without receiving authorization. Upon notication of a real or possible

problem, WarmlyYours.com Inc., will issue an Authorization to Proceed
under the terms of the Limited Warranty.

Unit must be inspected for shipping damage at time of delivery.
Warranty claims will not be accepted on damaged units that are
installed. WarmlyYours.com, Inc. is not liable for loss or damage of

the device due to improper installation, theft, re, earthquake or other

natural occurrences.

Warranty is void if the Ember unit is tted with unauthorized replacement

parts, or non-approved additional components. Ember is not designed
to come in contact with any item. Any damage to an item that contacts
the Ember, or damage to Ember as a result of contact with an item,
shall not be covered under this warranty.

Warranty is voided if the serial number tag is removed, damaged, or
altered in any way.

WARMLYYOURS.COM INC. DISCLAIMS ANY WARRANTY NOT
PROVIDED HEREIN, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE. WARMLYYOURS.COM INC.
FURTHER DISCLAIMS ANY RESPONSIBILITY FOR SPECIAL,
INDIRECT, SECONDARY, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS
PRODUCT, INCLUDING INCONVENIENCE OR LOSS OF USE.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE
FACE OF THIS DOCUMENT. NO AGENT OR REPRESENTATIVE
OF WARMLYYOURS.COM INC. HAS ANY AUTHORITY TO EXTEND
OR MODIFY THIS WARRANTY UNLESS SUCH EXTENSION OR
MODIFICATION IS MADE IN WRITING BY A CORPORATE OFFICER.

Controls sold under the WarmlyYours.com Inc. name are warranted for
3 year from the date of sale.

INSTALLER INFORMATION

Company Name Phone

Address Email

City State Postal/Zip

Fax

Product Serial Number:

HOMEOWNER INFORMATION

Name Phone

Address Email

City State Postal/Zip

Fax

Product Serial Number:

11