Warm House Amazon, P50-1/0345 Important Instructions & Operating Manual

IMPORTANT INSTRUCTIONS & OPERATING MANUAL

Amazon – Decorative Electri c Fireplace

with On Screen Display

Item No: P50-1/0345

Read these instructions carefully before attempting to assemble, install, operate or maintain

the product described. Protect yourself and others by observing all safety information. Failure

to comply with instructions could result in personal injury and / or property damage. Retain

instructions for future reference.

1

GENERAL SAFETY INFORMATION

When using this fireplace, basic precautions should always be taken to reduce the risk of fire, electric
shock and injury to persons, including the following:

CAUTION – Due to the high temperature, keep electrical cords, drapery and other furnishings at least 3
feet from the front, side and rear of the fireplace.

1. Carefully read all instructions before using the fireplace and retain for future reference.

2. Remove the unit from its packaging and check to make sure it is in good condition before use.

3. Do not let children play with any parts of the packing (such as plastic bags, etc.).

4. Check the household voltage to ensure that it matches the fireplace’s rated specification.

5. Before using the fireplace, carefully check the power cord and plug for any damage.

6. Be sure that the room is equipped with a working smoke detector.

7. Before unplugging the power cord, turn off the power. When touching the unit, keep your hands dry

to prevent electric shock.

8. Do not place the fireplace near curtains or other inflammable objects. Keep combustible materials,

such as pillows, bedding, papers, clothes, and curtains at least 3 feet away from the front, side and
rear of the fireplace.

9. Do not block air intakes or exhaust in any manner to prevent fire.

10. Do not use on soft or uneven surfaces, like a bed, where openings may become blocked.

11. Exhibit extreme caution when any fireplace is in the vicinity of children and infants.

12. Never leave children or infants unattended while the fireplace is on or plugged in.

13. When not in use, always unplug the fireplace.

14. Prevent water from entering the housing of the fireplace during operation or while in storage.

15. Always store the fireplace in a dry area free from any moisture. This fireplace is not intended for use

in bathrooms, laundry areas, or similar indoor locations. Never place the fireplace where it may fall
into a bath tub or get exposed to water in any way.

16. Do not use in places where gasoline, paint, or other inflammable liquids are used or stored.

17. Do not run the cord under carpets. Do not cover the cord with throw rugs, runners, or similar

products. Arrange the cord away from traffic areas such that it will not be tripped over by anyone.

18. Do not operate any fireplace with a damaged cord, a damaged plug, after the fireplace malfunctions,

or if it has been dropped or damaged in any manner. Return the fireplace to an authorized service
facility for examination, electrical or mechanical adjustment, or repair.

19. Do not insert fingers or allow foreign objects to enter any ventilation or exhaust opening as this may

lead to an electric shock or fire, or may even damage the fireplace.

20. This fireplace becomes hot during use. To avoid burns, do not let bare skin touch hot surfaces. If

necessary, use the handles when moving this fireplace.

21. Use this fireplace only as described in this manual. Any other uses not recommended by the

manufacture may cause fire, electric shock, or personal injure and may void warranty privileges.

22. Always plug fireplaces directly into a wall outlet. Never use an extension cord, power strip, surge

protector, multiple outlet adapter, cord reel or outlet-type air freshener. The use of such devices
creates a fire hazard.

23. Connect to properly grounded outlets only.

2

24. Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that the fireplace plug

properly fits into the outlet before each use. During use, make sure the fireplace plug does not
overheat. If necessary, have a qualified electrician check and / or replace the wall outlet.

25. Always plug the Fireplace directly into a wall outlet/receptacle. Never use with an extension cord or

re-locatable power tap (outlet/power strip).

26. Do not place the fireplace near a bed for objects such as pillows or blankets can fall off the bed

and

be ignited by the fireplace.

27. Never clean this fireplace while it is plugged in. To disconnect, turn control to OFF, then remove the

plug from the outlet. Never pull the cord. Always hold the plug firmly and then remove from the
outlet.

28. This fireplace is intended for supplemental heat and / or decorative purposes. Continuous use for

several hours can impact the performance and life of the fireplace.

29. This Fireplace has a safety device that makes it stop working once the inner temperature reaches

85°(± 2°F). To reset the appliance, turn it off and disconnect power, let it cool off for 10 minutes and
plug back in.

30. It is not intended to be used in commercial, industrial or agricultural settings.

31. Do not use outdoors.

Getting Started

• Remove the fireplace from the box.

• Please retain all packaging after you have checked and counted all the parts and the contents

against the list.

Package Contents

• Electric Fireplace

• Front Panel

• Wall Mount (Preassembled to the fireplace)

• 4 x Wall Plugs

• 4 x Screw 1

• 4 x Screw 2

• Decorative Crystals

• Remote Control

• Instruction Manual

Features

• Wall Mountable Electric Fireplace

• Heats rooms up to 1000 Sq. Ft.

• Decorative flame effect works independent of heat

• Great for use all year round

• Crystal pebbles with color changing bed

• LED Flame technology for realistic effects

• Multiple flame modes

• 1500 Watts

• Energy Efficient

• Built-in Thermostat (50°F - 86°F or 10°C - 30°C)

3

Name

Illustration

Fireplace
Glass Panel

Remote control

Wall Mount (preassembled to Fireplace)

• Automatically adjusts power to match the set temperature

• Built-in Timer (0.5 hours to 8 hours)

• Built-in overheat protection (auto safety shut-o-)

• Built-in child safety lock

• On-screen Display shows temperature, heat mode, flame mode, Flame brightness,

timer & child lock

• Heat Resistant Tempered Glass Panel

• Remote Control Included

• Wall Mount & Screws Included

• Product Dimensions: 48’’ (w) x 5.7’’ (d) x 22’’ (h)

Quick Reference Guide

• Prior to installation, please ensure that the voltage and capacity of your power outlet is

compatible with your fireplace.

• Your fireplace may emit a slight, harmless odor during its first use. This odor is a normal reaction

caused by the initial heating of internal fireplace parts and it will not occur again.

• It is normal for fireplace to make a rattling sound for a short duration of time during its first use.

• If your fireplace does not emit heat, please ensure the fireplace switch is on. For further

information, please refer to the Troubleshooting section of this manual.

Description of Parts

4

Decorative Crystals

Wall plug (4pcs)

Screw 1 (4pcs)

Screw 2 (4pcs)

Drill

Phillips screwdriver

Note: Tools Required (not included)

Helpful Tips before Installation

• Please retain all packaging until you have checked and counted all the parts and other package

contents.

• The package contains small apparatus which should be kept away from young children and

infants.

• We suggest that you move all the smaller parts into a container to reduce the risk of losing them.

• At least 2 people are required to install this fireplace.

• It is recommended to place your fireplace near an existing outlet, for ease of electric connection.

• Do not attempt to wire new outlets or circuits. To reduce the risk of fire, electric shock or injury

to persons, always have a licensed electrician perform maintenance and other repairs.

• Connect to properly grounded outlet only

• Do not connect the fireplace to the power supply until properly mounted on the wall and the

instructions are carefully read.

• The minimum distances must be observed as shown in the diagrams below.

• During installation of the fireplace, avoid any possible damage to concealed cables.

5

• Please be careful when drilling holes.

Identifying Mounting Location

• When choosing a location for your electric Fireplace, ensure that the general instructions are

followed.

• This Fireplace must be mounted on a flat wall. Ideally, install the Fireplace directly on a brick

wall, masonry surface or the internal wooden frame of a plasterboard wall. If the wooden frame
behind the plasterboard is not accessible, use a minimum of four heavy-duty anchors (not
included) that are suitable for the weight of the Fireplace. If you are not sure if the wall is stable
enough,

consult a hardware expert.

• If the Fireplace is to be mounted on to a plasterboard wall with wooden studs, make sure the

wall is strong and stable enough to hold the weight of the appliance. The vapor control barrier
must not be damaged, and the structural members of the house must not be damaged. We
recommend minimum 12mm thick plasterboard.

• Do not recommend that the Fireplace be fitted to a wall covered in blown vinyl wallpaper,

polystyrene tiles or other flammable materials.

• It is important that the Fireplace be never installed under a shelf or flammable materials such as

curtains.

• For best results, install the Fireplace away from direct sunlight, moisture and dust.

• Before drilling into walls, always check that there are no hidden wires, water pipes, gas pipes etc.

Make sure that screws and wall plugs supplied are suitable for supporting the unit in your
surface. Consult a qualified person if you are not sure.

• For best view of the flame effect, it is recommended that there be a distance of 2 feet from the

bottom of the fireplace and the floor.

Unpacking & Handling

Before starting the installation of this Fireplace, please read the following:

1. Installation should be carried out by two adults to avoid injury or damage. If for any reason it is

considered too heavy, please obtain additional assistance.

2. When lifting the Fireplace, always keep your back straight. Bend your legs and not your back.

3. Avoid upper body / top heavy bending. Always bend from the knees rather than the waist. Do

not lean forward or sideways while handling the fireplace.

4. Always grip the Fireplace with the palm of the hand. Do not use the tips of fingers for support.

5. While mounting, always keep the Fireplace as close to the body as possible.

6. Use gloves to provide additional grip.

7. Unpack the package and lift the product gently out of the box, place it on a flat surface with the

front panel facing up.

6