Trademarks or service marks of third parties used herein are
the trademarks or service marks of their respective owners.
©2014 Waring Consumer Products
150 Milford Road
East Windsor, NJ 08520
www.waringpro.com
Printed in China
PC1000 IB
14WR005863
IB-12550
CLEANING & MAINTENANCE
Always disconnect the power adapter from the main housing before
cleaning.
Carefully remove the drip tray from the back of the main housing. Empty
the drip tray and rinse it with clean water. Be sure that it is completely dry
before replacing.
To clean the housing, wipe with a non-abrasive damp cloth, then dry. Do
not use abrasive cleaning agents.
Any other servicing should be provided be an Authorized Service
Representative
.
TROUBLESHOOTING
Touchpad control power button is very sensitive to touch. If you accidently
touch the power button before plugging in the wine chiller/warmer it may
take approximately 10-20 seconds to turn the unit on after it has been
plugged in.
approximaTe ChillinG Times
Set
Temperature
Cooling Time at
70˚F Room Ambient
Temperature *
Set
Temperature
Cooling Time at
70˚F Room Ambient
Temperature *
64˚ F/18˚ C 10-12 minutes 50˚ F/10˚ C 42- 46 minutes
63˚ F/17˚ C 12-14 minutes 48˚F/9˚ C 50-60 minutes
61˚ F/16˚ C 16 -20 minutes 46˚ F/7˚ C 60 -70 minutes
59˚ F/15˚ C 18 -22 minutes 45˚ F/7˚ C 70-80 minutes
57˚ F/13˚ C 22-26 minutes 43˚ F/6˚ C 75- 85 minutes
54˚ F/12˚ C 28-32 minutes 41˚ F/5˚ C 90-100 minutes
*Actual chilling/warming time will depend on room ambient temperature, the initial temperature of the wine,
the bottle size (as related to surface contact area to the interior of the chilling plates), and volume of the wine bottle.
If wine is stored at or above 72°, the chilling process may take longer but will be quicker and more accurate
than if chilled in the refrigerator. For best results, store wine at 55°.