Page 1
ChickenChicken
Chicken
Chicken Chateau
Open Air Hutch
Assembly
Instructions
Item #14055
1
2
3
4
5
6
7
Hardware: #902096
A B C D E F G
Front Door Panel
#902097
H J
Left Pan el Post
#90 2104
O x 2
Large Pen
Support Bars
#9 02111
Back Panel
#902098
I x 2 K x 2
Small Pen
Front/Back
#90 2105
P x 2
Pull Pan
Support Bars
#9 0211 2
V
Nest Box Roof
#9 0211 8
Gable Ro of Panel
#9 0211 9
Left Pan el
#902099
Small Pen D oor
#902106
Right Panel
#90 2100
Nest Box S ides
#90 2107
Q R S
Pull Pan
#9 02113
Ladder
#9 0211 4
Y
Long Roof
Ridge Cap
#902120
Gable Roof
Ridge Cap
#90 2121
Large Pe n
Front Panel
#90 2101
L M x 2 N x 2
Nest Box Fro nt
#90 2108
Nest Box Floor
#9 0211 5
Z x 2 A1 x 4W x 2 X x 2
Short Roof
Ridge Cap
#9 0212 2
Large Pen
Back Panel
#902102
Gable Roof
Front/Back
#90 2109
T
Nest Box D ivide r
#9 0211 6
Handles
#902123
U x 4
#30014055
Large Pen
Right Panel
#90 2103
Gable Ro of Side s
#9 0211 0
Roof Pane l #90 2117
Step 1
Attach the Left Panel (H) to the Left Panel
(C) using three Ø3.5 x 45 screws (2). Assemble the Main
Hutch Body by attaching the Left Panel (C), Right
Panel(D), Back Panel(B), And Front Door Panel (A) using
ten Ø3.5 x 40 screws (3).
Main Hut ch Body
Assembly
Step 3
2
Ø3.5x45 3Pcs
Attach the Large Pen Support (O) to the
3
Ø3.5x40 10Pcs
Large Assembly using four Ø3.5 x 40 screws (3).
Step 2
Assemble the Large pen by attaching the
Large Pen Front (E), Large Pen Back Panel (F), and Large
Pen Right Panel (G) using six Ø.5 x 40 screws (3).
Large Pen
Assembly
Step 4
3
IMAGE 1 - Attach the Nest Box (K) to the
Ø3.5x40 6Pcs
Nest Box Front (L) using four Ø3.5 x 40 screws (3).
IMAGE 2 - Attach the Gable Roof Front & Back (M) to the
Gable Roof Sides (N) using four Ø3.5 x 35 screws (4).
IMAGE3 - Attach the Small Pen Front & Back Panels (I) to
the Small Pen Door Panel(J) using four Ø3.5 x 40 screws (3).
IMAGE 1
Nest Box
Assembly
IMAGE 2
Gable Roof
Assembly
IMAGE 3
Small Pen
Assembly
3
Ø3.5x40 4Pcs
3
Ø3.5x40 8Pcs
4
Ø3.5x35 8Pcs
Page 2
Step 5
Attach the Large Pen
Assembly to the main hutch
assembly using six Ø3.5 x
60 screws (1).
Step 6
Assembly to the Right Panel
using Ø3.5 x 60 screws (1).
Place the Pull Pan Support (P)
into the wood frames on the
Front Door Panel and Back
Panel of the main hutch
assembly. Slide the Pull Pan
(Q) into the Slot of the
Front Door Pane. Screw
the Ladder (R) into the
base of the small door on
the Right Panel of the main
1
Ø3.5x60 6Pcs
hutch assembly using two
Ø3.5 x 35 screws (4).
Step 7 Step 8
Attach the Nest Box Assembly
to the Left Panel of the main
hutch assembly using four
M6 x 35 screws (7).
Place the Nest Box Floor
(S) into the Nest box. Slot
the Nest Box Divider (T)
into position on the
Nest Box Floor.
7
Assemble the Four
Roof Panels to the
7
Main Hutch
Assembly and the
Large Pen Assembly
using sixteen Ø3.5 x
35 screws (4).
7
M6x35 4Pcs
Attach the Small Pen
4
1
4
Ø3.5x60 4Pcs
Ø3.5x35 2Pcs
4
4
Ø3.5x35 16Pcs
Step 9 Step 10
Attach the Nest Box Roof
(V) to the Nest Box using
four 3 x 16 screws (6).
Attach the Gable Roof
Attach the Gable Roof
Panels to the Gable Roof
Assembly using four
Ø3.5 x 35 screws (4).
Assembly to the Main
Roof using four Ø3.5 x
40 screws (3).
3
6
Ø3.5x40 4Pcs
Ø3x16 4Pcs
Step 11 Step 12
Attach the Long Roof
Ridge Caps (X), the Short
Roof Ridge Caps (Z), and
Attach the four Handles
(A1) using sixteen Ø3.5 x
25 screws (5).
the Gable Roof Ridge
Cap (Y) using twenty
Ø3.5 x 25 screws (5).
4
4
Ø3.5x35 4Pcs
X4
5
Ø3.5x25 20Pcs
5
Ø3.5x25 16Pcs
Care Tip
To protect the wood on your hutch you need to re-apply the protective stain finish at least 1x each year.
Use a safe and non-toxic water based stain (available at your local paint or hardware center).
Keep hutch in a safe area away from high winds and extreme temperatures.
If you have any questions or concerns about this product contact our customer service department
at 1-800-295-2243 Mon-Fri 8:00 – 4:00 MST or email us at [email protected]
Loading...