Page 1
Item #01994 & 02056
HOME SWEET HOME
2 Story Hamster Cage
#30001994
Pick up the cage top and set it onto the plastic base. Use the attachment latches to lock the
top to the base.
Step 4
Unfold the front, back, and side panels.
Step 2
Cage Wire
#902275
Place the wire panels on a flat surface
with the door facing up.
Step 1
5” Elbow Tube
#902276
Shelf
#902280
Plastic Base
#902277
Plastic Wheel
#902279
Wheel Pin
#902278
Note: If the wire hooks have become bent in shipping, carefully pry them open until they fit on the wire frame.
Lock the two side panels onto the back and front panels
by snapping the wire hook onto the wire frame.
Step 3
Attach the 5” Elbow
Tube to the underside
of the shelf by snapping
into place on the hole
in the shelf. Insert the
assembled shelf and tube
through the top doorway.
Snap shelf to cage wire
on the 12th wire up from
the bottom.
Insert the Wheel Pin into the center hole
in the back of the wheel. Attach the exercise
wheel assembly near the center of the back
wire panel between the 3rd and 4th wire up
from the bottom. Turn the Wheel Pin vertically
against the horizontal wires to lock in place.
If you have any questions or concerns about this product contact our customer service department
at 1-800-295-2243 Mon-Fri 8:00 – 4:00 MST or email us at [email protected]
, ,
Loading...