Page 1
Item #01993 & 02055
HOME SWEET HOME
1 Story Hamster Cage
#30001993
Pick up the cage top and set it onto the plastic base. Use the attachment latches to lock the
top to the base.
Step 4
Unfold the front, back, and side panels.
Step 2
Cage Wire
#902281
Place the wire panels on a flat surface
with the door facing up.
Step 1
5” Elbow Tube
#902282
Shelf
#902286
Plastic Base
#902283
Plastic Wheel
#902285
Wheel Pin
#902284
Note: If the wire hooks have become bent in shipping, carefully pry them open until they fit on the wire frame.
Lock the two side panels onto the back and front panels
by snapping the wire hook onto the wire frame.
Step 3
Attach the 5” Elbow
Tube to the underside
into place on the hole
in the shelf. Insert the
assembled shelf and
tube through the top
doorway. Snap shelf
to cage wire on the
7th wire up from
the bottom.
Insert the Wheel Pin into the center hole
in the back of the wheel. Attach the exercise
wheel assembly near the center of the back
wire panel between the 3rd and 4th wire up
from the bottom. Turn the Wheel Pin vertically
against the horizontal wires to lock in place.
If you have any questions or concerns about this product contact our customer service department
at 1-800-295-2243 Mon-Fri 8:00 – 4:00 MST or email us at [email protected]
, , p
Loading...