WansView NCL615W User Manual
IP
Dear users, the configuration for this camera
is professional, so please read the user
manual carefully before using the camera.
IP
Camera
Camera
NCLL
((NC
User
User
2013-12 V1.2
series)
series)
manual
manual
Statement
If the user manual can not help you to solve the problem, please call our technology center
Notice
1、 Installation Environment
Keep away from the places for high-temperature, heat source and direct sunlight;
Keep away from water and when get wet, cut off the power immediately.
Avoid using at damp environment; the reference range for operation humidity is below
Avoid using in overheating and too cold environment, the reference range for operation
Please install it horizontally or wall mounting, avoid strenuous vibration place and not put
2、 Transport and Handling
The package is well-designed to ensure the security during the delivery, so please do
Do not move the ip cameras from overheated to supercooled condition frequently,
Do not move the item when is power on, otherwise the main board might be damaged.
1. Please check the power supply before it is working
2. Be careful not to bang the camera or subject it to strong impacts or shocks.
3. Do not directly touch the optical components for the image sensor, if necessary, please
4. Do not aim the camera directly into the sun or at other intense light sources that could
5. Keep away from laser when it is working, otherwise the image sensor can be damaged.
6. If the equipment is not working properly, please contact the store or the service center,
for solutions. We will update the content for the new functions without notice.
85%RH.
temperature is -10℃~ +50℃
other equipments onto the item
not change the package at random.
otherwise it will frost and shorten the service life.
Notice:
place a clean and moistened cloth with alcohol and wipe the dirt gently; When not in use,
please place the dust cover on to the item to protect the image sensor.
affect the image quality (it is not the problem for the ip camera), also shorten the service
life for the image sensor.
do not disassemble or modify the equipment in any way. （Problems caused by
unauthorized modification or repair should be at your own risk.）
http://www.wansview.com
2
Index
1 PRODUCT INTRODUCTION............................................................................................................. 3
1.1 PRODUCT SUMMARY........................................................................................................................ 3
1.2 PACKAGE FOR TYPICAL PRODUCTION............................................................................................... 3
2 INSTALLATION GUIDE...................................................................................................................... 4
2.1 WIRED CONNECTION TO LAN.......................................................................................................... 4
2.2 WIFI CONNECTING TO LAN............................................................................................................ 5
2.3 CONNECTING TO WAN.....................................................................................................................6
3 OPERATION OF IE BROWSER....................................................................................................... 8
3.1 VIEW VIDEO......................................................................................................................................8
3.2 DEVICE INFORMATION......................................................................................................................9
3.2.1 Device status............................................................................................................................ 9
3.2.2 Device alias setting.................................................................................................................. 9
3.2.3 Device date and time setting....................................................................................................9
3.2.4 Local recording path................................................................................................................9
3.3 DEVICE WEB SETTING.....................................................................................................................10
3.3.1 Basic network settings........................................................................................................... 10
3.3.2 Wireless wifi settings..............................................................................................................10
3.3.3 Manufacture’s DDNS setting................................................................................................. 10
3.3.4 Third party DDNS setting...................................................................................................... 10
3.3.5 UPnP settings.........................................................................................................................11
3.4 ALARM SETTINGS.......................................................................................................................... 11
3.4.1 Alarm service setting..............................................................................................................11
3.4.2 Mail Service Setting............................................................................................................... 12
3.4.3 FTP Service Setting............................................................................................................... 12
3.4.4 Alarm log............................................................................................................................... 13
3.5 USER AND DEVICE SETTING............................................................................................................13
3.5.1 Multi-device Setting............................................................................................................... 13
3.5.2 User Settings.......................................................................................................................... 14
3.5.3 PTZ settings........................................................................................................................... 14
3.5.4 Maintain.................................................................................................................................14
4 VISITING DEVICE BY OTHER SOFTWARE................................................................................ 15
4.1 OTHER WEB BROWSER................................................................................................................... 15
4.2 MOBILE PHONE SOFTWARE.............................................................................................................15
4.3 CENTRALIZATION CONTROL.......................................................................................................... 15
5 PRODUCT FAMILY FOR NCL SERIES........................................................................................ 16
5.1 WANSVIEW VGA PTZ CAMERA NCL610W.................................................................................. 16
5.2 WANSVIEW VGA PTZ CAMERA NCL614W.................................................................................. 16
5.3 WANSVIEW WATERPROOF IP CAMERA NCL615W.........................................................................17
5.4 WANSVIEW VGA PTZ CAMERA NCL616W.................................................................................. 17
http://www.wansview.com
3
1 Product introduction
1.1Product summary
Thank you for choosing our company’s L series IP camera, the IP Camera combines a
high quality digital video camera with network connectivity and a powerful web server to
bring clear video to your desktop from anywhere on your local network or over the
Internet. It is very suitable for family, shops, office building and so on.
The video is compressed by MJPEG. There are VGA/QVGA/QQVGA three video
resolutions optional. User can changes some parameters according to their
demands to satisfy his own visual prefer;
Infrared LED for night vision covers 5m area, to realize 24 hours monitoring;
Support 802.11b/g/n protocol, can build up wireless monitoring;
Support motion detection, send alarm information by email and FTP;
Support mobile phone to view;
Built in web server, all data is transferred through one port; it is easy for user to
do the network setting;
Manufacture attached a label at the bottom of each IP Camera, it include DDNS.
When IP Camera is connected to the internet, this URL can be used to visit the
device;
Manufacturer provides free software, support Multi-view, long time recording,
video playback etc;
1.2Package for typical production
NCL610W
5V√√√-√√
NCL614W
5V√√-√√√
Main features for L series：
Stand
of
plastic
Antenna
Type
Accessory
Power
adaptor
CD Cable
BracketABracket
L
http://www.wansview.com
4
NCL615W
5V√√√-√√
NCL616W
5V√√√-√√
Please check carefully if all listed items are included in the package, if anything
missing, please contact vendor in time.
2 Installation guide
2.1Wired connection to LAN
Power on the IP camera, connect IP camera to router by network cable, meanwhile,
Insert CD to computer driver, double click “LSearch_en.exe” in the CD, run the
Network cable
Router
Network cable
Notice:
connect computer to the same router, example of figure 1.
Figure 1
software, click “Search”, select the device searched, click “Browse” to open browser,
it will pop up user login dialog, enter default user name(admin) and
password(123456) to login the camera as figure 2.
http://www.wansview.com
5
If you installed the firewall software in your PC, when you run the LSearch_en.exe, it
You can hold on reset button on the camera for 10 seconds to restore factory default
2.2WIFI connecting to LAN
Figure 2
We suggest using IE kernel browser to view the video （it can provide more functions）,
but user needs to install video player before viewing the video. Click “OCX Download ” to
download OCX and install it.
Notice:
may pop up a window to say “whether you want to block this program or not”, then
you should choose not to block.
if you forget user name and password, during the process, don’t disconnect the
power, otherwise the camera maybe damaged.
You can connect the camera with router by wireless connection, as figure 3.
Figure 3
Before connecting router by wifi, please connect them as chapter 2.1 to Login camera
and enter wifi setting, and then operate as the following step, example of figure 4.
Loading...