wanscam HW0029 Quick Installation Manual

1

Solar Power IP

Camera

Quick Installation

Guide

3

Step 1: Hardware Installation

3

Screw the antenna to the back of the camera; Make sure it is attached securely，

1).If have Sun , put it under the Sun.(if no , please plugin the power several seconds )

2).The green light inside of the camera will show on10s ,if in the darkness , the red LED lens will
be on as well .

After the installation, please use your computer to find the AP signal CAMXXYY, and

connected it make a active for the Solar Power IP Camera .

For example : connect the AP signal CAM6626

3

Step 2: Software Installation

Go to the website www.wanscam.com/xiazai , find JW/HW CD series , and download the IPCam search

tool and Install it on you computer .

Every camera has an IP address, fixed or dynamic. The search tool is used to find its IP address and port, and also

you can use the search tool to modify your camera’s information.

Just run this software on your computer.

Step 3: Login the Camera

1. Double click , and following screen will pop up. Just find the Solar Power IP Camera ,