PHABLET
Model: E6T
Directions
Forbidding: forbid improper operations to avoid
damaging the PHABLET.
Caution: cautions for operators to avoid
potential damages. Please note and remember.
Importance: important information, common
notes, definitions and references, etc.
Other trademarks and trade name may be used in this
manual to refer to either the entities claiming the
marks and names or their products.
The manufacture disclaims any proprietary interest in
trademarks and trade names other than its own.
Information in this manual is subject to change without
notice.
Reproduction in any manner whatsoever without
the written permission from the manufacture is
strictly forbidden.
Hereby, NANJING WANLIDA TECHNOLOGY
CO.LTD., declares that this PHABLET (E6T) is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
CONTENT
Directions .................................................................... 2
Safety Precautions ..................................................... 5
1 Know Your PHABLET .............................................. 8
2 Connect the Power Adapter .................................... 9
3 Turn on the PHABLET ................................ ........... 10
4 Get to know your system ...................................... 11
4-1 Add screen shortcuts .......................... 13
4-2 Delete screen shortcuts/widgets ....... 14
4-3 On-screen Keyboard .......................... 14
5 System Settings ..................................................... 15
5-1 WIRELESS &NETWORKING ........... 15
5-2 Device ................................................... 18
5-3 Personal ............................................... 20
5-4 System .................................................. 21
6 Communication ..................................................... 22
6-1 Chrome ................................................. 22
6-2 Email ..................................................... 23
7 Fun ......................................................................... 26
7-1 Camera ................................................. 26
7-2 Music ..................................................... 27
8 Appendix ................................................................ 28
8-1 Troubleshooting ................................... 28
8-2 Specifications ....................................... 30
9 CE Mark .................................................................. 31
10 FCC Statement ..................................................... 32
Safety Precautions
1. DO NOT press the LCD Screen. DO NOT place the
PHABLET with small items, they may scratch LCD Screen.
2. DO NOT expose the PHABLET to dirty or dusty environment.
Keep the environment clean and dry.
3. DO NOT place the PHABLET on uneven or unstable work
surface.
4. DO NOT place or drop objects on the top of the PHABLET.
DO NOT shove any foreign objects into the PHABLET. DO
NOT cover the LCD Screen strongly.
5. DO NOT expose the PHABLET to strong magnetic or
electrical fields; DO NOT place the floppy disk near or on the
PHABLET, which may loss the data of the floppy disk.
6. DO NOT leave the PHABLET facing the sun as it can
damage the LCD Screen, especially in the car.
7. SAFE TEMP: This PHABLET should only be used in
environments with ambient temperatures between 5℃ (41℉ )
and 35℃ (95℉ ).
8. DO NOT expose the PHABLET to or use near liquids, rain,
or moisture.
9. Caution: risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
10. DO NOT throw the PHABLET in municipal waste. Check
local regulations for disposal of electronic products.
11. The PHABLET and the Adapter may occur some heat during
operating or charging. DO NOT leave the PHABLET on your
lap or any part of the body in order to prevent discomfort or
injury from heat exposure.
12. INPUT RATING: Refer to the rating label on the PHABLET
and be sure that the Power Adapter complies with the rating.
Only use attachments or accessories specified by the
manufacturer.
13. Checking the connections between the main unit and
attachments before turning on the PHABLET.
14. DO NOT insert anything into the PHABLET that may result in
short circuit or damage the circuit.
15. Powering off the PHABLET, if you want install or remove
some external devices, which are not support hot-plug.
16. Disconnect the PHABLET from the electrical outlet and
remove any installed batteries before cleaning. And Keep it
away from children.
17. DO NOT disassemble the PHABLET, only a certified service
technician should perform repairs on your computer.
Otherwise, problem may result and the manufacturer should
not hold responsibility for the damage.
18. To prevent possible hearing damage, do not
listen at high volume levels for long periods.
19. If an equipment is provided with a replaceable battery, and if
replacement by an incorrect type could result in an explosion
(for example, with some lithium batteries).
1 Know Your PHABLET
2 Connect the Power Adapter
The PHABLET comes with a universal AC-DOCK adapter and the
allowable input voltage of adapter is from 100V to 240V.
Use only the AC adapters, power cords and batteries that
are approved for use with this device. Use of another type
of battery or AC adapter may cause fire or explosion.
The connection between adapter and the PHABLET is shown as
below:
Your PHABLET and the accessories may differ from the
pictures shown.
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
3 Turn on the PHABLET
Press the power button for seconds to turn on the PHABLET.
Press the power button once to access standby mode and press
again to wake it up; press and hold the power button, and then tap
power off to power off the PHABLET.
When the system halts, press the power button for about 8
seconds to turn it off forcedly.
4 Get to know your system
Press the Power button for seconds to turn on the PHABLET and
then it display locked screen as shown below, you need to swipe
up the screen to unlock.
If it’ s your first time to use the PHABLET, the system will enter the
guide menu. Please finish the initial setting following the
instructions.