Wanin USA Vidifox PV 380 User Manual
Vidifox
®
Document Camera
PV 380
USER MANUAL
Please r
ead this User Manual thoroughly before you use the document camera. Keep the CD-ROM in
a convenient place so you can use it quickly if you need to.
Please visit us at http://www.waninusa.com where you can
get product suppo
rt, the latest driver
updates, and answers to frequently as
ked ques
tions (
FAQs) and t
echnical ques
tions.
1
PRECAUTIONS
NOTICES: PLEASE READ CAREFULLY BEFORE USE
Use the document camera under the rated electric conditions.
Do not place the docum ent cam er a on any unstable surfac e. It m ay fall and caus e injur ies or
damages.
Do not place this device directly under sunlight or near heaters.
Do not place this device near water.
Keep the camera away from acid or alkali gas.
Do not place this document camera in humid, dusty, windy or vibrant locations.
The recommended operating environment is:
Temperature: 32ºF-113ºF (0ºC--45ºC)
Humidity: less than 75%
Always unplug BEFORE cleaning the device. Use a damp soft-cloth for cleaning. Do not
use volatile solvent.
When this equipment functions abnormally, such as smoke, smell, noise, immediately
unplug and call for professional assistance.
Unplug the docum ent camera or shut off the power when not in use.
Legal Notice
FCC Part 15
This device complies with Part 15 o f the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause h armful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Compilation and Publication Notice
This manual has been compiled and published to cover the latest product’s descriptions and
specifications. The contents of this manual and the specifications of this product are subject to
change without notice.
Wanin USA reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused by
reliance on the materials presented, including but not limited to typographical and other errors relating
to the publication.
© 2010 Wanin USA Inc. All Rights Reserved.
2
TABLE OF CONTENTS
1
. PARTS IDENTIFICATION.................................................................4
2. CONTROL PANEL ..............................................................................5
3. INPUTS AND OUTPUTS ....................................................................6
4. REMOTE CONTROL .........................................................................7
5. CONNECTIONS...................................................................................9
5.1. COMPUTER CONNECTION ...........................................................................................9
5.2. VGA OUT PUT C ONNECTI ON........................................ ............ ............... .......... .........10
5.3. C-VIDEO OUTPUT CONNECTION..............................................................................10
5.4. S-VIDEO OUTPUT CONNECTION .............................................................................. 11
6. COMMUNICATE WITH COMPUTER .......................................... 11
6.1. COMPUTER REQUIREMENTS .................................................................................... 11
6.2. CONTROL VIA RS232 ................................................................................................... 11
6.3. USB CAMERA.................................................................. ........ .... ....... ........ .... ...... .........18
7. FEATURES .........................................................................................31
LIGHT.....................................................................................................................................31
ZOOM IN AND ZOOM OUT ................................................................................................31
FOCUS ADJUSTME NT ......... ....................................... ...................................... ...................31
BRIGHTNESS ADJUST MENT ............... .............................................. ................................31
WHITE BALANCE ADJUSTMENT ............................................................. ........................31
TEXT/PICTURE MOD E ........................................................ .... ........ ...... ..... ........ ........ ....... ..31
IMAGE FREEZE ....................................................................................................................32
IMAGE MIRROR...................................................... ...... ......... .... ........ ....... .... ........ ...... ..... ....32
SPLIT SCREEN............................................. ............ ...... ............. .......... ......... ............ ...........32
IMAGE SAVE....................................................................................... ....... ........ .... ...... .........32
IMAGE RECALL ...................................................................... ........ ...... ..... ........ ........ .. ........32
MULTIPLE INPUTS AND OUTPUTS ..................................................................................33
USB 2.0 PORT ........................................................................................................................33
USB IMAGE CAPTURE AND VIDEO RECORDI NG.........................................................33
RS232 CONTROL ..................................................................................................................33
8. SPECIFICATION ...............................................................................33
9. TROUBLE-SHOOTING: ..................................................................34
10. PACKING LIST................................................................................35
3
1.
PARTS IDENTIFICATION
1. Remote control IR receiver
2. Camera
3. LED light box
4. Upper mechanical arm
5. Main mechanical arm
6. Side panel
7. Back panel
8. Base unit
9. Control panel
4
2. CONTROL PANEL
1. POWER: Tur n on/off the power .
2. HOME: Activate VGA output terminal, providing the image from camera.
3. LAMP: Turn on/off the LED light.
4. FREEZE: Freeze/unfreeze the image.
5. T/P: Switch the output image between text mode and pictur e mode.
6. SPLIT: Split screen, enable the comparison between the frozen image and live image.
7. COMPUTER: Activate the VGA input.
8. VIDEO: Activate the C-VIDEO&S-VIDEO output, providing the image from camera.
9. BRIGHT+/-: Image brightness adjustment.
10. PAGE DOWN: Saved image page down when image recall mode is enabled.
11. AUTO: Automatically adjust focus, color and white balance.
12. SAVE: Capture and save the cur r ent image.
13. RECALL: Image recall mode enabled, display the saved images.
In Image Recall mode:
1: Display the first image.
2: Display the second image.
3: Display the third image.
4: Display the fourth image.
14. FOCUS+/-: Adjust focus manually, focus far and focus near.
15. ZOOM+/-: Image zoom in and zoom out control.
5
3. INPUTS AND OUTPUTS
1. DC 12V: Power input.
2. RS 232: Serial port, to control the document camera from a computer via this port.
3. AUDIO OUT: Audio output.
4. VGA OUT: VGA (RGB) signal outp ut ( 15 pi n D-SUB).
5. C-VIDEO: Composite video output.
6. S-VIDEO: S-Video output.
7. VGA IN: VGA (RGB) signal input(15 pin D-SUB).
8. AUDIO IN: Audio input.
9. USB: Capture image into a connected computer via provided software
6
4. REMOTE CONTROL
7
1. : Tur n t he document camera on or off.
2. Computer: Press this button to output signals from VGA-IN.
3. Video: Activate the VIDEO&S-VIDEO output, providing the image from camera.
4. XGA/SXGA: Toggle the output format between XGA and SXGA.
5. Home: Output the image from the document camera.
6. Number Buttons:
In image recall mode:
1: Display the first image.
2: Display the second image.
3: Display the third image.
4: Display the fourth image.
7. : Turn the LED light on or off.
8. Mir: Output right- an d-left, up-and-dow n mirror image.
9. Save: Capture the current image.
10. Recall: Enter the Image Recall mode to display saved images.
11. Page +/-: in Image Recall mode, navigate between pages of thumbnail images.
12. Auto: Automatic adjust focus, color and white balance.
13. Split: Split screen, enable the comparison between the frozen image and live image.
14. Zoom+/-: Image zoom in and zoom out control.
15. Frz: Freeze/unfreeze the image.
16. Bri+/-: Image brightness adjustment.
17. T/P: Switch the output image between the text mode and picture mode.
18. Fc+/-: Adjust focus manuall y, focus far and focus near.
20. Sharp+/-: Adjust sharpness of the im age.
21. Blue+/-: Image color adjustment (blue).
22. Red+/-: Image color adjustment (red).
8
5. CONNECTIONS
5.1. COMPUTER CONNECTION
RS232 cable
To RS232
USB
Audio Cable
To Audio Output
To RGB Output
9
5.2. VGA OUTPUT CONNECTION
5.3. C-
VIDEO OUTPUT CONNECTION
Audio Cable
To Audio Input
To Video Input
Video Cable
10
5.4. S-VIDEO OUTPUT CONNECTION
S-Vide Cable
Audio Calbe
To Audio input
To S-Video in
6. COMMUNICATE WITH COMPUTER
6.1. COMPUTER REQUIREMENTS
The PC's hardware and software configurations shall not be less than the following require ments：
Operating system: Windows XP
CPU: 1.8 GHz
Physical memory: 512M
Video memory: 64M
6.2. CONTROL VIA RS232
PV 380 can be controlled from a computer via RS232.
1. Double click on the RS232 software in provided CD to run the install shield wizard.
11
Loading...