Wampler Plexi Drive Deluxe overdrive effectpedaal Wampler Plexi Drive Deluxe quick reference guide

®

Deluxe

The Plexi-Drive Deluxe, is a direct descendent of the Plexi-Drive Standard but
with a few upgraded features. Like the original, the Plexi-Drive Deluxe's
unique gain structure can cover everything from Vintage '68 style Plexi tones
to the all out massive rock tones of a JTM-45®.

With the addition of an all-new active 3 band Bass/Mids/Treble EQ stack –
you can now have even more tonal control. With the bass boost option, you
can emulate the feeling of the low-end thump of a 4x12” cabinet (or two) at
the flick of a switch. The bass boost will allow you to dial in your low end at
lower volume gigs or at bedroom volume levels. Along with the bass switch,
we added a bright switch to add highs – which makes changing from bright to
dark guitars a breeze. The Plexi-Drive Deluxe also features a one knob,
pre-gain boost that is voiced like that "famous overdrive with pronounced
mids” – to help push your leads in to overdrive.

The Plexi-Drive Deluxe will fill your Marshall® void and give you the crunch,
response, boost, and feeling that your rig begs for. Whether you are playing
sold out shows or rocking out by yourself – the Plexi-Drive Deluxe will take
your tone and allow you to create your own flavor of rock!

To get the most out of your new pedal, you'll want to become very familiar
with the controls. The Plexi-Drive Deluxe has a straightforward control
scheme, and doesn't take a great deal of time to understand, but there are
some subtleties to how it works its magic that should be explained. There is a
volume (level), main gain (post gain), 3 band EQ and boost (pre gain) - with
the two switches (bass boost and bright boost) you can get almost any Mar­shall® tone through your rig!

It is worth spending a little time playing with how the EQ reacts to differing
gain levels as well as what effect the switches have... It’s all good fun!

Volume: This control adjusts the output level of the Plexi-Drive Deluxe.

Bass: Adjusts the amount of bass applied to the effected signal. If you are using a Stratocaster® style,

single coil guitar rather than a humbucker loaded instrument, you may _nd you need more bass to
“fatten” up the tone. When in the fully counterclockwise position, the tone will be much thinner and
brighter and when fully clockwise it will be fuller, darker and heavier around the low end.

Mids: Adjusts the total amount of midrange that is applied to the effected signal. You have more control
over how much or how little you choose to dial in.

Treble: Works in the same way as the bass and mids knob, but controls the amount of treble on the
effected signal. Again, fully counterclockwise the treble is reduced considerably and clockwise brings it
forward.

Bass Boost Switch: This switch offers an added level of control over the lower frequencies of the pedal
by allowing you to kick in a niece low end “thump”. Great for fattening up single coils, making small
cabinets sound big, or getting the most from the higher tone knob setting.

Bright Boost Switch: Opposite of the bass boost switch is the bright boost switch. This switch will allow
you to add higher frequencies “brighten up” otherwise seemingly dark pickups or amps.

Post gain knob: this knob saturates the circuit with a lovely warm overdrive designed to give you those
famous powerfull tones that you love.

Pre gain knob: this knob will allow you to dial in that famous “mid-range” overdrive boost to hit the front
end of the main gain channel. (Note – 3 band EQ will not effect the boost channel)

Suggested Settings

For those about to rock... A cooking Plexi

Post Gain switch: This bypass switch is used to engage the main Plexi-drive gain stage of the pedal. We
use a true-bypass relay because it utilizes a quieter and smoother switch that is more reliable than
traditional bypass switches. Your original tone/signal will remain unaffected when the pedal is not
engaged.

Where you going with that gun in your
hand?

Nashville rocls

Pre gain switch: This bypass switch will allow you to engage that famous “mid-range” overdrive boost to
hit the front end of the main gain channel. We use a true-bypass relay because it utilizes a quieter and
smoother switch that is more reliable than traditional bypass switches. Your original tone/signal will
remain unaffected when the pedal is not engaged.

WAMPLER Pedals Limited Warranty. WAMPLER oers a ve (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect,
normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or modications to the product, which have not been authorized by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair replacement as provided below.
RETURN PROCEDURES. In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE DEPT – 3383 Gage Ave., Huntington Park, CA 90255, USA. A Return Authorization Number must be
obtained from our Customer Service Department prior to shipping the product. Products must be shipped in their original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Returns Authorization Number must appear in large print directly below the shipping address. Always include a
brief description of the defect, along with your correct return address and telephone number.
When emailing to inquire about a returned product, always refer to the Return Authorization Number. If WAMPLER determines that the unit was defective in materials or workmanship at any time during the warranty period, WAMPLER has the option or repairing or replacing the product at no additional charge, except as set forth below. All replaced
parts become a property of WAMPLER. Products replaced or repaired under this warranty will be returned via ground shipping within the United States freight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE. In no event is WAMPLER liable for any incident or consequential damages arising out of the use or inability of the possibility of such damages, or any other claim by any other party. Some states do not allow the seclusion or limitation of consequential damages, so the above limitation and exclusion may
not apply to you. This warranty gives you specic legal rights and you may also have other rights which may vary from state to state.
FOR YOUR PROTECTION. Please complete the online warranty registration within (10) ten days of the date of purchase so that we may contact you directly in the event of a safety notication issued in accordance with the 1972 Consumer Product Safety Act.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantees that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experience radio/TV technician for help.
Changes or modications not expressly approved by the party responsible for compliance could void the user’s warranty to operate the equipment. CUSTOMER SUPPORT. Our dedicated sta is ready to help you with any warranty or product questions – please email us at [e-mail] or call us on [phone]
Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a warranty claim: www.RegisterYourWamplercom