Rev. 1.1
Description 799956.0xx Manual Syringe Gun
page 1 of 4
Walther Systemtechnik GmbH – D 76726 Germersheim
phone: +49 (0)7274-7022-0 fax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Description
NOTE
Please read this Description carefully before first using the device and strictly adhere to the
instructions!
This device may only be worked with and worked on by persons who are familiar with this
Description and the current regulations for industrial safety and accident prevention.
Manual Syringe Gun
Article number: 799956.010
799956.030
Fig. 1.0
Keep this Description at a safe place close to the device!
The instructions must be available at all times!
Rev. 1.1
Description 799956.0xx Manual Syringe Gun
page 2 of 4
Walther Systemtechnik GmbH – D 76726 Germersheim
phone: +49 (0)7274-7022-0 fax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
EC Declaration of Conformity
in accordance with the EC Machinery Directive 2006/42/EC of May 17th, 2006, Annex II A
We herewith declare, that the design and construction of the machine marketed by us as described
below corresponds with the safety requirements of the EC Directive 2006/42/EC. If the machine is
modified without our consent, this declaration loses its validity.
Manufacturer
Walther Systemtechnik GmbH
Hockenheimer Straße 3
D- 76726 Germersheim
Description
Manual syringe gun, Art.No. 799956.010
799956.030
We declare that the product is in accordance with the following relevant regulations:
The following harmonized European Standards have been applied:
DIN EN ISO 12100 Safety of machinery; basic concepts, general
principles for design – Risk Assessment and Risk
Reduction (ISO 12100:2000)
Other applied technical standards and specifications:
Authorized representative for the technical documentations:
Stefan Hirl, Hockenheimer Straße 3, D- 76726 Germersheim
Germersheim, 18 April 2016
(place, date) (Stefan Hirl, management)
Rev. 1.1
Description 799956.0xx Manual Syringe Gun
page 3 of 4
Walther Systemtechnik GmbH – D 76726 Germersheim
phone: +49 (0)7274-7022-0 fax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Content
page
SIZE
ART.-NO.
10cc
799956.010
30cc
799956.030
WARNING
Always read and follow the instructions of the Safety Data Sheet of the used adhesive.
Failure to follow may result in personal injury..
1 Description 3
2 Intended use 3
3 Safety information 3
4 Setup instructions 4
5 Spare parts list 4
1 Description
The manual syringe gun is a light weight barrel applicator that provides excellent control for low to medium
viscosity fluids. Available in 10 and 30cc, the manual syringe gun is simple to setup and easy to use.
2 Intended use
The manual syringe gun is used for professional application of different adhesives. Other use than this has
not been evaluated and may lead to an unsafe condition.
Use of this manual gun in ways other than those described in this description may result in injury to persons
or damage to property.
3 Safety information
Rev. 1.1
Description 799956.0xx Manual Syringe Gun
page 4 of 4
Walther Systemtechnik GmbH – D 76726 Germersheim
phone: +49 (0)7274-7022-0 fax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Gun assembly
Item #
Replacement component
Description
799956.10
1
799956.010-ROD
Push rod, 10cc
2
799995.W10
Piston, 10cc
3
799999.N10
Barrel, 10cc
4
799993.001
Tip cap
799956.30
1
799956.030-ROD
Push rod, 30cc
2
799995.W3055
Piston, 30cc
3
799999.N30
Barrel, 30cc
4
799993.001
Tip cap
4 Setup instructions
1. Press the lock button (2) and insert the push rod (3) to the gun body; make sure the push rod is
pushed all the way back.
2. Insert the syringe barrel assembly (1) into the gun assembly and turn clockwise to lock.
3. Install the dispense tip to the syringe barrel outlet.
4. Squeeze the trigger (4) to start dispensing.
5. Press the lock button and pull the push rod back to remove the syringe barrel assembly.
5 Spare parts list
Loading...