Walt Disney Parks and Resorts US TP R1G2 User Manual
Digital Access Point v2
900-000353
Rev 3.0
TPv2 Installation and User Guide
Page 1 of 22
TPV2 INSTALLATION AND USER GUIDE
Confidential and Proprietary
Digital Access Point v2
Rev
Date
Author
Description
01
8/11/2016
Brian Piquette, Chris
Burfeind
Initial release
02
8/16/2016
Brian Piquette, Chris
Burfeind
Incremental updates and added
detail
2.1
8/16/2016
Brian Piquette, Chris
Burfeind
Added Canadian approval callout
and PoE Spec.
2.2
9/16/2016
Brian Piquette, Chris
Burfeind
Updated Hex wrench spec and
added note for alternative step to
plug cables in.
Faceplate replacement section
deleted. See 900-000356, TPv2
Service Guide.
Fixed figure numbering.
2.3
Brian Piquette, Chris
Burfeind
Updated document number for
Design Specification document
2.4
10/28/2016
BP/CB
Updated section 2 with
installation limitations.
3.0
03/03/2017
BP/CB
Production Release:
Updated Figure 2 to reflect
changes to unit orientation and
back housing.
Updated section 5 with ESD
grounding instructions.
Added material list
Added Faceplate installation and
removal instructions.
900-000353
Rev 3.0
TPv2 Installation and User Guide
Page 2 of 22
Revision History
Confidential and Proprietary
Digital Access Point v2
900-000353
Rev 3.0
TPv2 Installation and User Guide
Page 3 of 22
Table of Contents
Table of Contents
1. Introduction
1.1 Purpose
1.2 Definitions
2. Safety Warnings
2.1 Trained Installation and Service Personnel Warning
2.2 Important Safety Instructions
2.3 Explosive Safety Warning
2.4 Lightning Warning
3. Regulatory Compliance
3.1 Federal Communications Commission (United States)
3.2 UL Certification
4. Specifications
4.1 Physical Connection Ports
4.2 HF RFID Capabilities
4.3 UHF RFID Capabilities
4.4 Proprietary 2.4GHz Radio Interface
4.5 BTLE Interface
4.6 Operating Conditions
4.7 Power
4.8 User Accessible Surfaces
4.9 Faceplate
5. Installation
5.1 Electrostatic Discharge Warning
5.2 Telecom Warning
5.3 Touch Point Installation Instructions
5.4 Faceplate Installation Instructions
Confidential and Proprietary
Digital Access Point v2
900-000353
Rev 3.0
TPv2 Installation and User Guide
Page 4 of 22
1. Introduction
The Disney Touch Point version 2 (TPv2) Multi-Media Reader is part of a proprietary data
acquisition system. It provides an HF RFID reader, UHF RFID reader, Bluetooth LE Host
interface and a MagicBand 2.4GHz RF interface to read data from proprietary RFID and
RF media. This RFID/RF tag data can be then sent over an Ethernet connection to a data
collection/concentration object. The TPv2 is designed to be mounted in several known
stanchions which provide the final weatherproof enclosure for the product.
The TPv2 assembly is designed to be mounted in one of several different stanchion
designs. Among the existing stanchion designs, there are multiple themed stanchions,
and several kiosk installations. Figure 1 shows the TPv2 assembly that goes into the
themed stanchion assemblies.
Figure 1 –TPv2 Assembly
Confidential and Proprietary
Digital Access Point v2
Term
Definition
RFID
Radio Frequency Identification
OTS
Off the shelf
cULus (NRTL)
Underwriters Laboratories
certified for U.S. and Canada
(Nationally Recognized Testing Laboratory)
900-000353
Rev 3.0
TPv2 Installation and User Guide
Page 5 of 22
1.1 Purpose
This document provides basic installation and user instructions for the Disney TPv2.
1.2 Definitions
Confidential and Proprietary
Digital Access Point v2
900-000353
Rev 3.0
TPv2 Installation and User Guide
Page 6 of 22
2. Safety Warnings
2.1 Trained Installation and Service Personnel Warning
Warning! Only those individuals that are trained and authorized by Walt Disney Parks
and Resorts US., Inc. are permitted to install this equipment.
Continuing compliance with FCC requirements requires the installation instructions to
be followed. No unauthorized modifications can be made to the equipment. Only the
external antennas provided with this equipment may be used. The antennas approved
for use with this product are as follows:
● Dipole: Linx P/N ANT-2.4-CW-HWR
● 3x3 Passive Array: Disney Part number 300-001220.
Read and follow all warning notices and instructions marked on the product or included
in the documentation. Before installing the product, read the rest of this document and
follow specific product instructions.
When installing, the placement of the device must also satisfy the following installation
requirements:
● Placement must allow for easily disconnecting the power cord/adapter of the
device from the AC wall-outlet.
● Keep the device away from excessive heat and humidity and keep the device
free from vibration and dust.
● Installation must at all times conform to local regulations.
● Network Connections can be made with either Unshielded Twisted Pair (UTP) or
Shielded Twisted Pair (STP) cabling.
2.2 Important Safety Instructions
When using this device, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons.
Do not use this product near water. For example, do not use:
● near a bathtub
● near a wash bowl
● near a kitchen sink or laundry tub
● in a wet basement
Confidential and Proprietary
Digital Access Point v2
900-000353
Rev 3.0
TPv2 Installation and User Guide
Page 7 of 22
2.3 Explosive Safety Warning
Warning! Do not operate this device near explosive devices, unshielded blasting caps
or in an otherwise explosive environment unless the device has been approved for such
use by qualified personnel.
Warning! Do not disconnect the power or any other cabling in an explosive
environment until such qualified personnel, trained specifically in explosive environment
handling, have determined it is safe to do so.
2.4 Lightning Warning
Warning! Do not connect or disconnect cables or otherwise work with the device
hardware during periods of lightning activity.
Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning.
Confidential and Proprietary
Loading...