Walrus Audio Emissary User Manual

EMISSARY

PARALLEL BOOST

OUTPUT JACK

1/4 inch cable to amplier.

BRIGHT

Clean, high headroom JFET boost,

with a slight emphasis on higher

frequencies to liven up your tone.

[em-uh-ser-ee] Anatomy. Sending or coming out, as certain veins

that pass through the skull and connect the venous sinuses inside

with the veins outside.

Like the veins its named after, the Emissary Parallel Boost features

two independent boost circuits running in parallel to work together

to help give your tone a real sinus clearing experience. Use one or

the other by itself, or mix any combination of both by turning up

each knob to the desired level. Great for making leads stand out,

slides sing, and nger picking really come to life.

9V JACK

9-volt DC, Center Negative,

100ma min.

INPUT JACK

1/4 inch cable from instrument.

MID

Controls volume for mid boost

circuit. This circuit features a

targeted boost at either 1kHz or

800Hz depending on how the

toggle switch is set.

BYPASS SWITCH

Turns the effect on and off.

1kHz OR 800Hz TOGGLE

Selects which frequency the MID
boost works with.

BYPASS LED

Illuminated when the effect is on.

MOMENTARY FUNCTION

The bypass switch also features a momentary function. When the bypass

switch is in off position, press and hold to temporarily activate the effect.

Releasing the switch turns the effect off.