Wallenstein WX370, WX350, WX360 Operator's Manual
OPERATOR'S MANUAL
WX
3-point Hitch Wood Splitter
370
Part Number: Z97140_EnRev May-2019
Introduction
WX370
3-point Hitch Wood Splitter
1. Introduction
1.1 Foreword
Congratulations on choosing a Wallenstein Threepoint Hitch Wood Splitter!
This high-quality machine is designed and
manufactured to meet the needs of an efcient wood
splitting operation.
This manual covers the Wallenstein 20-ton WX370.
The 3-point hitch mounted WX370 features horizontal
and vertical splitting.
The standard splitter models are equipped with an
open-center control valve. For tractors with a closedcenter system, the splitters are equipped with a closed
center control valve and the model is identied as
WX370C.
Units of measurement in Wallenstein Equipment
technical manuals are written as:
US Customary (SI metric).
Review all safety, operation and maintenance
information contained in this manual.
WARNING!
Do not attempt to start or operate the machine
without thoroughly reviewing this manual for
safe and proper operation.
Keep this manual with the machine at all times.
W034
Keep this manual handy for frequent reference and
to pass on to new operators or owners. Call your
Wallenstein dealer or distributor if you need assistance,
information or additional copies of the manuals.
Wallenstein Equipment Inc. • © 2019
www.wallensteinequipment.com
2
WX370
3-point Hitch Wood Splitter
Table of Contents
1. Introduction ............................................................2
1.1 Foreword .........................................................2
1.2 Delivery Inspection Report ..............................4
1.3 Serial Number Location ...................................5
1.4 Decal Information ............................................6
2. Safety ......................................................................7
2.1 Safety Alert Symbol .........................................7
2.2 Signal Words ...................................................7
2.3 Why is SAFETY important? .............................8
2.4 Safety Rules ....................................................8
2.5 Equipment Safety Guidelines ..........................9
2.6 Safety Training ................................................9
2.7 Hydraulic System Safety .................................9
2.8 Be Prepared ..................................................10
3. Safety Signs .........................................................12
3.1 Safety Sign Locations ....................................12
3.2 Safety Sign Explanations ...............................13
3.3 Replacing Damaged Safety Signs .................14
4. Familiarization......................................................15
4.1 To the New Operator .....................................15
4.2 Machine Components ....................................16
5. Controls ...............................................................17
5.1 Hydraulic Valve ..............................................17
5.2 Stroke Limiter Accessory ...............................18
5.3 Splitter Frame Latch ......................................19
6. Operating Instructions ........................................20
6.1 Attaching to Tractor .......................................20
6.2 Connecting Hydraulic Hoses .........................21
6.3 Operating Safety ............................................22
6.4 Before Start up ..............................................22
6.5 Splitting Logs .................................................23
6.6 Machine Break-In ..........................................25
6.7 Transporting ..................................................25
7. Storing the Wood Splitter ...................................26
7.1 Removing from Storage .................................26
8. Service and Maintenance ....................................27
8.1 Maintenance Safety .......................................27
8.2 Maintenance Schedule ..................................27
9. Troubleshooting ...................................................28
10. Specications ....................................................29
10.1 Machine Specications ..................................29
10.2 Common Bolt Torque Values ........................30
10.3 Hydraulic Fitting Torque ................................31
11. Warranty .............................................................32
12. Alphabetical Index .............................................33
Introduction
3
Introduction
1.2 Delivery Inspection Report
WALLENSTEIN
WX370 Three-point Hitch Wood Splitter
To activate warranty, register your product online at
http://www.wallensteinequipment.com
_________________________________________
Customer’s Name
_________________________________________
Contact Name
_________________________________________
Dealer Name
(_________)_______________________________
Phone Number
_________________________________________
Serial Number
WX370
3-point Hitch Wood Splitter
Pre-delivery Inspection
Inspect for damage from shipping. Immediately contact the
shipping company if damage is found.
Three-point Hitch Wood Splitter
Hydraulic Valve Control Function
Hydraulic Cylinder Function
Horizontal / Vertical Pivot Moves Freely (as equipped)
Front and Rear Support Stands Move freely
All fasteners are Tight
Lubricate all Pivot Points (as equipped)
Check that all Hydraulic Connections are tight
Review Operating and Safety Instructions
Safety Checks
All Safety Decals Installed
Guards and Shields Installed and Secured
Review Operating and Safety Instructions
__________ /__________ /__________
Delivery Date
I have thoroughly instructed the buyer on the equipment care, adjustments, safe operation and applicable
warranty policy and reviewed the manual.
_________________________________________
Dealer’s Rep. Signature
__________ /__________ /__________
Date
The product manuals have been received by me and
I have been thoroughly instructed as to care, adjust-
ments, safe operation and applicable warranty policy.
_________________________________________
Owner's Signature
__________ /__________ /__________
Date
4
WX370
3-point Hitch Wood Splitter
Introduction
1.3 Serial Number Location
Always provide the model and serial number of your
Wallenstein product when ordering parts, or requesting
service or other information. The product information
plate location is shown below.
WX370
For future convenience, record the product Model
and Serial Number in the spaces provided below.
Model:
Serial Number:
Fig. 1 – Product Information Plate Location
Record Product Information Here
5
Introduction
WX370
3-point Hitch Wood Splitter
1.4 Decal Information
When getting familiar with the Wallenstein product,
notice that there are numerous decals located on the
machine. There are different types of decals for safety,
information, and product identication. The following
section explains what they are for and how to read
them.
Safety Decals are pictorial with a yellow background
and generally two panel. The top panel shows the
safety alert (the potential hazard) and the bottom panel
shows the message (how to avoid the hazard).
Safety alert
Message
Product Decals indicate machine model and serial
number, and other important information.
Manufactured by:
Wallenstein Equipment Inc., 7201 Line 86, Wallenstein ON N0B2S0, Canada
MODEL: ##########
DIMENSION- RIM/JANTE /ERIT : PNEU:
###
COLD INFL. PRESS/PRESS DE
CONFLA A FROID (PSI/LPC):
THIS VEHICLE CONFORMS TO ALL APPLICABLE STANDARDS
PRESCRIBED UNDER THE CANADIAN MOTOR SAFTEY REGULATIONS
IN EFFECT ON THE DATE OF MANUFACTURE / CE VEHICLE EST
CONFORME A TOUTES LES NORMES QUI LUI SONT APPLICABLES EN
VERTU DU REGLEMENT SUR LA SECURITE DES VEHICLES
###
AUTOMOBILES DU CANADA EN VIGUEUR A LA DATE DE SA FABRICATION.
VIN/
NLV:
TYPE OF VEHICLE/TYPE DE VEHICLE:
GAWR/PNBE (KG): GVWR/PNBV (KG):
#########
TRA / REM
###
###
###
See the section on safety signs for safety decal
denitions. For a complete illustration of decals and
decal locations, download the parts manual for your
model product at www.wallensteinequipment.com.
Safety Notice Decals are pictorial with a blue
background and generally rectangular with single or
multiple symbols. This decal informs what Personal
Protective Equipment is required for safe operation.
6
WX370
3-point Hitch Wood Splitter
2. Safety
2.1 Safety Alert Symbol
This Safety Alert Symbol means:
ATTENTION! BE ALERT!
Safety
YOUR SAFETY IS INVOLVED!
The Safety Alert Symbol identies important safety
messages on the Wallenstein wood splitter and in
the manual. When you see this symbol, be alert to
the possibility of personal injury or death. Follow the
instructions in the safety message.
2.2 Signal Words
The signal words DANGER, WARNING and CAUTION
determine the seriousness level of the warning
messages in this manual. The appropriate signal word
for each message in this manual has been selected
using the following guidelines:
DANGER –
Indicates an imminently hazardous situation that,
if not avoided, will result in death or serious injury.
This signal word is to be limited to the most extreme
situations typically for machine components which, for
functional purposes, cannot be guarded.
IMPORTANT – To avoid confusing equipment
protection with personal safety messages, a signal
word IMPORTANT indicates a situation that if not
avoided, could result in damage to the machine.
NOTE:
(plus text) – indicates an additional
explanation for an element of information.
Safety
WARNING –
Indicates a potentially hazardous situation that, if not
avoided, could result in death or serious injury, and
includes hazards that are exposed when guards are
removed. It may also be used to alert against unsafe
practices.
CAUTION –
Indicates a potentially hazardous situation that, if not
avoided, may result in minor or moderate injury. It may
also be used to alert against unsafe practices.
7
Safety
WX370
3-point Hitch Wood Splitter
2.3 Why is SAFETY important?
Three Big Reasons:
Safety
The policy of Wallenstein Equipment Inc. is to produce
products that are safe and reliable. However, even
when using well-engineered equipment, there is always
an element of risk. To minimize the risks and promote
safety at all times, this section of the operator’s manual
details a number of safety rules that must always be
followed and obeyed.
YOU are responsible for the SAFE operation and
maintenance of your Wallenstein Trailer Wood Splitter.
YOU must ensure that you and anyone else who
is going to use, maintain or work around the wood
splitter be familiar with the operating and maintenance
procedures and related safety information contained
in this manual. This manual provides good safety
practices that should be followed while using the wood
splitter.
Remember, YOU are the key to safety. Good safety
practices not only protect you but also the people
around you. Make these practices a working part of
your safety program. Be certain that EVERYONE using
this equipment is familiar with the recommended use
and maintenance procedures and follows all the safety
precautions.
2.4 Safety Rules
• Accidents Disable and Kill
• Accidents Cost
• Accidents Can Be Avoided
• DO wear appropriate Personal Protective
Equipment (PPE). The suggested equipment
includes but is not limited to the following:
- Hearing Protection
- Protective glasses, goggles or face shield
- Heavy work gloves
- Protective shoes with slip resistant soles
• DO have a rst-aid kit available
should the need arise and know
how to use it.
• DO read and understand all safety signs located
on the machine before operating, servicing,
adjusting, or cleaning.
• DO inspect and secure all guards before starting.
• DO have a re extinguisher available
should the need arise. Know how to use
it.
• DO think SAFETY! Work SAFELY!
• DO NOT expect a person who has not read and
understood all operation and safety instructions
to use the machine. An untrained operator is
not qualied and is exposed to possible serious
injury or death. It is the owner's responsibility
to make sure to the operator has familiarity and
understanding of the machine.
• DO NOT allow riders during transport.
• DO NOT risk injury or death by ignoring good
safety practices.
• DO give operating instructions to operators or
employees before allowing them to operate the
machine.
• DO read and understand ALL
Safety and Operating instructions
in the manual and follow them.
The most important safety device
on this equipment is a SAFE
operator.
• DO review safety related items annually with
all personnel who are operating the machine or
performing maintenance.
8
WX370
3-point Hitch Wood Splitter
Safety
2.5 Equipment Safety Guidelines
Always place the machine in a Safe Condition before
performing any service work, maintenance procedures,
or storage preparation.
SAFE CONDITION
• Shut off engine.
• Make sure all moving parts have stopped.
• Disconnect battery ground (-) cable.
• Block or chock wheels.
1. Never use equipment with safety shields removed.
Keep all shields in place. If shield removal
becomes necessary for repairs, reinstall the shield
prior to use.
2. Replace any safety sign or instruction sign that is
not readable or is missing. Location of safety signs
is indicated in this manual.
3. Do not allow anyone other than a responsible,
properly trained and physically able person to
operate this machine. This equipment is dangerous
to children and persons unfamiliar with its
operation.
4. Do not modify the equipment in any way.
Unauthorized modication may result in serious
injury or death and may impair the function and life
of the equipment.
5. Never exceed the limits of the machine. If its ability
to do the job or to do it safely is in question—
STOP IMMEDIATELY!
2.6 Safety Training
bystanders to possible serious injury or death. If
elderly people are assisting with the work, their
physical limitations need to be recognized and
accommodated.
3. Learn the controls and how to stop the machine
quickly in an emergency.
4. If this machine is loaned or rented, it is the
machine owner's responsibility to make certain that
every operator:
• Reads and understands the owner's manual
• Is instructed in safe and proper use of the
equipment
• Understands and knows how to perform the
Safe Condition procedure
2.7 Hydraulic System Safety
1. Make sure that all the components in the hydraulic
system are kept in good condition and are clean.
2. Before applying pressure to the
system, make sure all components
are tight, and that lines, hoses and
couplings are not damaged.
3. Do not attempt any makeshift repairs to the
hydraulic lines, ttings or hoses by using tapes,
clamps or cements. The hydraulic system operates
under extremely high pressure. Such repairs can
fail suddenly and create a hazardous and unsafe
condition.
4. Wear proper hand and eye
protection when searching for a
high-pressure hydraulic leak. Use
a piece of wood or cardboard as
a backstop instead of hands to
isolate and identify a leak.
Safety
1. The best safety feature is an
informed, careful operator—we
ask you be that kind of operator.
It is the operator's responsibility
to read, understand and follow
ALL safety and operation
instructions in the manual.
2. Train all new personnel and review instruc tions
frequently with existing workers. Only properly
trained and physically able operators should
use this equipment. A person who has not
read and understood all operation and safety
instructions is not qualied to use the machine.
Untrained operators expose themselves and
5. If injured by a concentrated high-pressure
stream of hydraulic uid, seek medical attention
immediately. Serious infection or toxic reaction
can develop from hydraulic uid piercing the skin
surface.
6. Relieve pressure in the hydraulic system before
working on it.
9
2.8 Be Prepared
Safety
Safety
1. Determine where the split wood is going to be piled
ahead of time. Make sure it does not interfere with
safe loading of wood into the splitter.
2. Precut logs so wood is ready to load into the
splitter. Do not run a chain saw and the splitter at
the same time.
3. Determine a safe work area location:
• Area must be clear of stones, branches or
hidden obstacles that might cause a tripping,
hooking or snagging hazard.
• Ground should be rm and level.
4. Operate only in daylight or good articial light.
5. Make sure machine is properly adjusted and in
good operating condition.
6. Perform the Pre-operation Checklist before
starting work (see Pre-operation Checklist on page
23).
WX370
3-point Hitch Wood Splitter
7. Do not operate on hillsides or when working area is
cluttered, wet, muddy or icy to prevent slipping and
tripping. Operate only on level ground.
8. Position machine so prevailing winds blow engine
exhaust fumes away from the operator.
9. Do not operate machine inside a closed building to
prevent asphyxiation from engine exhaust.
10. Stop engine when leaving the machine
unattended.
10
WX370
3-point Hitch Wood Splitter
Safety
2.8.1 Sign-Off Form
Anyone using this machine must read and thoroughly
understand all Safety, Operation and Maintenance
information in this manual. An untrained operator
should never use this machine.
To help document this training, the sign-off sheet
provided below can be used.
Make periodic reviews of Safety and Operation a
standard practice for all operators. Review again at the
startup of every season.
Sign-off Form
Date Owner Employee
The design and manufacture of this product conforms
to relative provisions in the following standards:
ISO 4254-1 Agricultural machinery – Safety
ASABE S318 Safety for Agricultural Field Equipment
ISO 3600 Operator’s Manual – Machinery for
Agriculture, Forestry & Lawn Equipment
Safety
11
Loading...