Wall Bed Factory Mission, Mission Horizontal, Camden, Hudson, Farmhouse Assembly Instructions Manual

Wall Bed Factory

Assembly Instructions

Camden
Murphy Bed

Farmhouse
Murphy Bed

Hudson
Murphy Bed

Mission Horizontal
Murphy Bed

Mission
Murphy Bed

WallbedFactory.com

Assembly Instructions

Page 2 of 19

1.800.975.8451

Tube Leg Murphy Beds

**Please make sure all hardware is included. If anything is missing call 1.800.975.8451.
A.

B.

Leg Installation Parts

A. Right-Facing Leg (1)
B. Left-Facing Leg (1)
C. Machine Screws (8)

(NOTE: Machine Screws are

pre-screwed into Bed Frame.)

B.

D.

C.
E.

A.

Items Not to Scale

INCLUDED HARDWARE:

Bed Installation Parts

A. Air Pistons (2)
B. 3” Sheet Rock Screws (4)
C. 1 5/8” Hexagonal Screws (4)
D. 1 1/2” Zinc Screws (4)
E. Allen Wrench

OPTIONAL: Hardware Kit for Metal
Stud/Masonary Walls

TOOLS NEEDED:

A. Stud Finder
B. Flathead Screwdriver

C. Power Drill w/ Phillips Head Screwdriver Bit & Drill Bits

A.

B.

Phillips Head

Screwdriver Bit

C.

WallbedFactory.com

Assembly Instructions

Page 3 of 19

1.800.975.8451

Tube Leg Murphy Beds

PART A: Assembling Wall Bed

Step 1:

Remove Wall Bed from packaging (package includes 5 bed pieces). Retrieve 2 blue-green Foam
Pieces from Side Panel packaging to use in a later step.

Determine where you want to position Wall Bed. Place Head of Bed 18” from wall. Lay out other
pieces as shown below.

Bed Frame

Crown

Headboard

Right Side Panel

Left Side Panel

Head of Bed
Foot of Bed

Foam Pieces

18” from wall