Walkingspree USA INSPIRE, WALKINGSPREE User Manual

Inspire Wireless Activity Tracker

Product Manual

JP1301

Getting Started

Your Wireless Activity Tracker
Box includes:

- Inspire Activity Tracker

- USB cable

- USB Dongle

- Wristband

- Belt clip

- Lanyard

- User manual

To save battery life, your Inspire
Activity Tracker arrives in
hibernation mode. Press and hold
down the button to activate the
Inspire. The progress bar will
change from empty to full to
indicate full activation as below.
Your Inspire will not arrive fully
charged.

Display Modes on Your Inspire
Activity Tracker. To rotate through
screens, press the top button.

Time/Date/Battery

Steps

Calories Burned

Distance

Minutes of Activity

% Personal Goal

% Program Goal

How to wear the Inspire

The Inspire can be worn:

1. on it’s own

2. in clip with lanyard

3. on the wrist using the wristband.

You might have to try different locations to
see what works the best for you in terms of
accuracy.

The Inspire is water resistant, but not
waterproof. Do not wear your Inspire
during activities when it might get wet.

Be sure to use the lanyard when using the
belt clip to prevent loss. Loop the string
through the belt clip a couple of times.
Attach the other end to your clothing.

Battery charge

-When the battery power is low, the 10%
battery mark will show to remind you to
charge your battery.

-It takes about one to two hours to
recharge an empty battery. You can
charge more frequently for shorter time
periods to provide enough battery life until
you can do a longer charge (this may
shorten battery life).

-A full battery will last a minimum of 3
days, but will typically last 5-7 days.

To charge the battery, plug the Inspire
into the PC Computer via the USB cable.
The indicator will show the charge level.

Note: Even if the Tracker is not in use,
please charge the battery at least once a
month to prolong battery life.

Install the PC software at:
www.walkingspree.com/setup
Plug one end of your USB cable in to
the Inspire and the other end into
an available USB port on your PC
computer.

iPhone App Setup:
www.walkingspree.com/mobile

After plugging in your Tracker, a
menu screen will appear on your PC,
select the “Register Tracker”option.
Enter your current Walkingspree
Username and password.

Upon receiving“Device Successfully
Registered” message, unplug the
Inspire from the USB port. During
registration the time on your tracker
will be synced to your local time.

Insert the bluetooth wireless dongle
into any available USB port. Your
Inspire should automatically pair
to your bluetooth dongle when you
are within 20 feet of the dongle.

Bluetooth® is a registered trademark of
Bluetooth SIG, Inc

Inspire Care & Maintenance

CLEANING THE UNIT

- To prevent fire or shock hazard, disconnect your unit
from the USB port of power source when cleaning.

- The finish on the unit may be cleaned with a dust cloth
and cared for as other furniture, Use caution when
cleaning and wiping the plastic parts.

- If the cabinet becomes dusty, wipe it with a soft dry dust
cloth. Do not use any wax or polish sprays on the device.

- If the front panel becomes dirty or smudged with
fingerprints it may be cleaned with a soft cloth slightly
dampened with a mild soap and water solution. Never
use abrasive cloths or polishes as these will damage the
finish of your unit.
CAUTION: Never allow any water or other liquids to get
inside the unit while cleaning.

Battery Care

- Do not burn or bury batteries.

- Do not puncture or crush.

- Do not disassemble.

- Recycle Li-Polymer batteries. Do not dispose of in the

trash.

- Use only chargers rated for Li-Polymer cells. Be sure the
charger’s voltage and current settings are correct for the
battery pack being charged.

- Charge batteries on a fireproof surface away from
flammable items or liquids.

- Batteries should NEVER be left unattended while
charging. Only adults should charge the batteries.

- Follow instructions for charging the product and do not
charge longer than recommended. Unplug the charger
when the battery is charged or not in use.

Specifications

Product Name: Inspire
Size:
Height: 1.8 inches (46 mm)
Width: 0.90 inches (23 mm)
Depth: 0.39 inches (10 mm)
Weight: 0.317 oz (9 g)
Battery: rechargeable lithium polymer battery
(65mAh)
Data Memory: 15 days

Support: http://support.walkingspree.com
Phone: [phone], select 1 for Support

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference
that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.

COMPLIANCE WITH FCC REGULATIONS

Printed in China.